Solvent resistant silk screen glass self drying ink

  Brand: outlets applicable to: metal, glass, ceramics, electroplating, hardware, stainless steel, aluminum alloy, wire drawing panel
Net weight of single piece: 1kg
Shading force: 100
Fineness: 0
01
Viscosity: 1500s
Mobility & Ge;: one hundred
Shelf life: 72 months
Model: MPL
Purpose: 1 Scope of application: iron, aluminum, alloy, glass, ceramics, electroplating, stone, anodic aluminum oxide surface and baking (spraying) paint surface, etc Diluent: s-03 diluent 3 Curing agent: 10% ta-9154 hardener can be added to increase adhesion and ink film hardness

Temperature resistance: low temperature glass ink
Performance: self drying glass paint
Basic information of glass ink supply
This product is made of high-grade imported acrylic resin and high-grade pigment through fine grinding and processing
It is used for silk screen printing and pad printing of various metal, glass, ceramics, stone, electroplating (aqueous electroplating), anodic alumina surface and baking (spraying) paint surface
It can obtain excellent adhesion without adding curing agent and baking

Ink characteristics:
1
Bright light, good adhesion, gasoline resistance and chemical resistance;
2
Good hand feel, good leveling and smooth surface;
3
Good surface hardness, strong impact resistance and scratch resistance;
4
Good resistance to gasoline, alcohol and chemicals;
Printing:
The selected mesh is 100-350 mesh, and the coating coverage area is 30 ~ 35 ㎡ per kilogram based on 120t mesh

The surface drying time is naturally volatilized for 5-15 minutes, the actual drying time is within 24 hours, and the performance is reached after 48 hours

1
Open oil and water with supporting special diluent
2
Wash the net with 718 washing water

3
Or add 10% of the supporting hardener to increase the adhesion and improve the hardness of the ink film

4
It is better to bake in the oven at 80 ℃ for 10 minutes

Test method (after complete drying):
1
3m adhesive tape is stuck to the surface of the ink with hundreds of grids at an angle of 45 degrees, which can be quickly pulled up without degreasing

Usage:
1
It is recommended to dilute with our company's special diluent, not 783 slow drying diluent
It should be fully stirred before use and sealed at any time after use

2
When mixing, add 10-12% of the company's supporting oil and water, dilute to the viscosity suitable for printing, and use the special diluent for pad printing for pad printing dilution; Clean with 718 mesh washing water

3
Do not mix with other types of inks, otherwise other adverse phenomena such as adhesion and chemical reaction are likely to occur

　　4
The service life of the ink with curing agent is 8 hours
Please discard it after expiration
The remaining ink cannot be recycled
Precautions:
1
The appearance of various printing materials is similar, but they may be different materials
Customers need to test print first to ensure that they meet the requirements before mass production

2
In the process of pad printing, if there is wire drawing or scattering, some slow drying paste can be added appropriately;
3
If the ambient temperature is too high, the original quality of ink will be affected
If the white color exceeds 150, it will change color
When baking, please use wood materials for baking, and do not directly contact with iron
4
According to the climate change, please keep away from the fire source and store in the dark at 15 - 30 degrees