Baking free aluminum alloy self drying silk screen printing ink

  Baking free aluminum alloy screen printing ink sales manufacturer scope of application: all kinds of metal spraying surface and metal spraying surface Metal surfaces Metal baked paint finish For the silk screen and pad printing of ceramics, stone, electroplating (aqueous electroplating), anodized aluminum oxide surface, electrostatic painting surface and baking paint surface, excellent adhesion can be obtained without adding curing agent and baking

2
Product features: smooth, good adhesion, good leveling, strong hardness, alcohol resistance, stamping resistance, scratch resistance and chemical resistance

3
Diluent: it is recommended to use the company's supporting special diluent to open the oil

4
Curing agent: This product does not need to add curing agent
Do not add incompatible curing agent, which will affect its effect
5
Ink blending method: when stirring, add about 10% diluent to dilute to the appropriate viscosity for printing

6
Drying time: the constant temperature surface drying time volatilizes naturally for 5-10 minutes, and the actual drying time is within 24 hours, reaching * * performance after 48 hours
The performance is better when baking in an oven at 80 ℃ for 15 minutes
Winter depends on the region

7
Service life: one year
Please discard after expiration
The remaining ink added with other additives cannot be recycled

[precautions for ink use]
1
Batch production shall be carried out after trial printing is confirmed to meet the requirements

2
Do a good job in removing grease and impurities on the surface of the printed object to promote the adhesion effect

3
The testing of adhesion, hardness, acid resistance, alcohol resistance, chemical resistance, scratch resistance, wear resistance and other properties can only be tested after complete curing

4
Without permission, this series of ink shall not be mixed with other types of ink and color matching

5
Screen printing plus an appropriate amount of wire drawing paste, the company's ultra slow dry diluent is more suitable for smooth printing process

[ink performance test results]
1
3M adhesive tape is stuck on the surface of the ink with a hundred grids at an angle of 45 degrees, which can be quickly pulled up without degreasing

2
99% alcohol 500g force to wipe the ink surface back and forth for 100 times without decolorization

[safety rules for ink use]
1
No fireworks are allowed during the use and storage of ink and diluent
2
When using, pay attention to the good ventilation of the construction site

3
Try to avoid direct skin contact

4
If this product is accidentally splashed in the mouth, nose, eyes and ears, wash it with a large amount of water or ask a doctor directly

5
For those allergic to this product, apply a layer of skin care cream or wear impermeable gloves before use

6
Pay attention to the humidity of the workshop
Excessive humidity will affect the adhesion, and high temperature is easy to block the network