Melamine tableware pad printing ink

  Melamine tableware pad printing ink sales manufacturer
1
Applicable materials: metal, electroplating, alumina, electrolytic plate, aluminum plastic plate, spray (baking) paint, spray plastic, PA plastic nylon, bakelite, FRP, melamine, etc

 
2
Product features: baking free, alcohol resistant, stamping resistant

 
3
Diluent: b-03 diluent or 783 slow drying diluent of the company

 
4
Curing agent: This product is a single component ink
If there are special requirements, you can also choose to add curing agent to increase adhesion and ink layer resistance

 
5
Ink mixing: after full mixing, take the required amount for mixing
First add curing agent in proportion and mix evenly, and then add diluent to dilute to the appropriate viscosity for printing; If the time limit for adding ink to the screen is exceeded, the adhesive will not be recycled in time

 
6
Screen and scraping: suitable for 80t-140t (200 mesh - 350 mesh) polyester screen, polyurethane PU oily scraping

 
7
Drying conditions and time: This product can be dried at room temperature or quickly by baking
The recommended drying temperature and time are 25 ℃ / 24 hours, 60 ℃ / 40 minutes, 80 ℃ / 30 minutes and 100 ℃ / 20 minutes

 
8
Performance test:
Mark 100% with 3m600 tape to test that there is no falling off;
Wipe back and forth with cotton cloth dipped with 95% industrial alcohol at 500g force level for 100 times without discoloration;
The edge of 1mm thick aluminum sheet is 100% free from falling off after punching, crimping and rolling at the printing position;
 
9
Package specification: 1kg / plastic can, 12 cans / box

 
10
Storage conditions: store in a dry and ventilated place at room temperature; Avoid high temperature, direct sunlight and fireworks

 
11
Precautions: please obtain MSDS safety manual from our company and carry out safety production according to the guidelines