Spray surface self drying metal ink

  Spray plastic surface self drying metal ink sales manufacturer
1
Scope of application: This product is mainly used for silk screen printing and pad printing of metal, glass, electroplating, electrophoresis, alumina, electrolytic plate, aluminum plastic plate, paint baking, plastic spraying, powder spraying, PU paint, amino baking paint, acrylic paint, PA plastic nylon, bakelite, glass fiber, FRP, resin, melamine, melamine, treated or untreated pet, PBT and other products

 
2
Product features: bright light, high covering power, good adhesion, alcohol resistance, white oil resistance and friction resistance

 
3
Diluent: use our b-03 special diluent or 783 oil, and clean the screen with 718 screen washing water

 
4
Curing agent: for two-component use, js-10 curing agent must be added together, with the addition amount of 10% - 15%
Increasing the addition proportion of curing agent can strengthen the adhesion, but it will weaken the ink color concentration and slow down the ink drying speed
When the addition proportion of curing agent exceeds 20%, it is necessary to bake and dry

 
5
Ink blending method: stir evenly before opening the can, and dilute the required amount of ink to the appropriate printing viscosity
If the curing agent needs to be added, add the curing agent first, stir and stand for 10 minutes, and then dilute it after the ink is completely crosslinked with the curing agent

 
6
Drying time: normal temperature drying, surface drying time 10-15 minutes, actual drying time within 24 hours, and reach * performance after 48 hours

 
7
Service life after adding curing agent: 6-8 hours
Please discard after expiration
The remaining ink cannot be recycled

 
 
 
[performance test]
 
1
3M Tape 100 grid test: 100% no falling off
 
2
Alcohol resistance test: dip absorbent cotton with 99% industrial alcohol at 500g force level for 500 times without decolorization

 
3
White oil resistance test: dip 6# white oil with absorbent cotton for 200 times at 500g force level without discoloration

 
 
 
[precautions]
 
1
A small amount of trial printing shall be conducted to confirm that it meets the requirements before mass production

 
2
Do a good job in removing grease and impurities on the surface of the substrate to promote the adhesion effect

 
3
Testing of adhesion, hardness, acid resistance, alcohol resistance, chemical resistance, scratch resistance, wear resistance and other properties,
 
It can only be tested after complete curing

 
4
Without permission, this series of ink shall not be mixed with other types of ink and color matching

 
5
No fireworks are allowed during the use and storage of ink and diluent

 
6
When using, pay attention to the good ventilation of the construction site and try to avoid direct skin contact

 
7
If this product is accidentally splashed in the mouth, nose, eyes and ears, wash it with a large amount of water or ask a doctor directly