Textile fabric far infrared finishing agent nano far infrared processing agent

  Far infrared finishing agent holposon & reg CyclopsMan
 
HOLPOSON® CyclopsMan  The main component is special ceramic powder, which can be stored for a long time
This product is a multi-functional finishing agent for textiles developed by Dr
Donghua University
In addition to the function of emitting ultra-high far red line to improve the body feeling of human body, it also has the effects of deodorizing and adsorbing peculiar smell
It is a multi-functional finishing agent with high added value
Suitable for finishing cotton, viscose, wool, nitrile / wool, polyester, nylon and other fibers
HOLPOSON® The fabric treated with cyclopsman has good hand feel and washability, and the emissivity is greater than 82%

 
1、 Physicochemical properties ,
Composition , Special ceramic powder, etc
Appearance , White weakly viscous liquid
Ionic , Nonionic
Solubility , Dissolved in water
PH value , 6～6
5
 
2、 Method of use
Dosage: it varies according to the type of material to be treated, generally 3
0-5
0% (o
w
f
)
1
Dip rolling method
Dosage: holposon & reg; CyclopsMan  30-60g/l
Treatment method: one dip and one rolling, with liquid rate of about 80%, and drying at 160-180 ℃
2
Impregnation method (applicable to cotton and viscose)
Dosage: 3
0-5
0% (o
w
f
)
Homogenizing finishing solution , Immersion temperature 40-60 degrees (20-30 minutes) , Dehydration (about 50% liquid volume) , Drying (100-120 ℃)
 
matters needing attention
1
Please use the prepared working fluid within 8 hours
2
It can be finished in the same bath with softener to improve the hand feel
 
Storage , Save
Store indoors to avoid high temperature and severe cold

 
 
 
 
 
 
 
 
 
 
 
Important statement: the above data and results are based on the current knowledge and experience of Zhejiang fulpusheng new materials Co
, Ltd
and the limited laboratory conditions
They are for reference only
Please confirm them through tests according to your own conditions
The company will not bear the losses caused by putting into production without confirmation of the sample!