Reasons for the increase of filter plate loss of filter press Yalong

  The filter press will always encounter problems in production
With the long-term use, the damage of the filter plate gradually intensifies
This problem cannot be ignored
On the one hand, the aging problem of the filter press itself may lead to overheating during operation
Secondly, the filter press may not pay attention to protection in the production process, which brings great pressure to the filter plate
The reasons for the increase of filter plate loss of the filter press are analyzed below
1
When the feed is insufficient or the feed contains inappropriate solid particles, the filter press itself will be damaged by excessive force
The solution is to end the cycle, reduce the volume of the filter plate or add a blind plate http://www
ylylj
com/news/20211126101051
html 2 if the flow outlet of the filter press is blocked by solids, or the feed valve or outlet valve is closed during startup, there will be no pressure leakage and damage the filter plate
Check the filter cloth, arrange the water outlet, check the water outlet, open the corresponding valve and release the pressure 3
Sometimes the medium will leak when the filter plate is not cleaned
In case of leakage, the edge of the filter press will be washed into the small ditch one by one
A large amount of medium leakage will cause the pressure not to rise and the mud cake cannot be formed
At this time, the filter plate 4 should be carefully cleaned and repaired
When the sludge is too thick or dry block remains, the feed inlet of the filter press will be blocked
At this time, there is no medium between the filter plates, only the pressure of the hydraulic system itself
The filter press is easy to be damaged under long-term pressure
Nylon cleaning scraper shall be used to clean the mud at the feed inlet
When using the filter press, it shall be protected and checked regularly
If the filter plate loss increases due to the aging of the filter press The article comes from: http://www
ylylj
com