The hydraulic system of the filtration equipment has a hydraulic station for conveying and storage

  The filtration equipment has reached the water quality treatment of high water level, so the equipment can easily treat all kinds of wastewater
In general, the feed pump of the filter press is unacceptable in front of all kinds of wastewater
After all, this is a disaster for wastewater
Whenever a large amount of wastewater is pumped
After all, I received all kinds of dirt and saw pure water flowing out of the filter cloth
In many cases, when the filtration equipment encounters high temperature in the filtration process, it is impossible to avoid water evaporation
The evaporation of water will reduce the actual working efficiency of the equipment to a certain extent
After all, if only the results are observed, the treated liquid will decrease slightly with evaporation, but this is also a normal phenomenon, which is inevitable in actual production
If we can better adapt to the weather when the pressure reducing filter works, the service life of the equipment can be prolonged
However, many times, we are always affected by various reasons
This important factor has been ignored and needs special attention in future production http://www
ylylj
com/news/20220209082801
html The hydraulic system of filter press is an important part of the whole system
The selected hydraulic oil has a great influence on the plate and frame filter press
Hydraulic oil can provide strong pressure for the filter press
If you want the filter press to work properly, you need strong pressure
When selecting hydraulic oil, please consider various factors
Choose neutral pressure oil, which has wear resistance and pressure resistance
What is the amount of hydraulic oil? The hydraulic system of the filtration system has a hydraulic station for pumping and storing oil
The storage space of the hydraulic station is also very limited, so it is necessary to add appropriate hydraulic oil to the hydraulic station regularly
Under normal circumstances, this amount can be about 85%, because with the increase of oil temperature, the volume will become larger, and the excess oil will directly affect the normal operation of the hydraulic station
The amount of oil in the hydraulic pump should not be less than 40%
Therefore, in daily life, it is necessary to regularly inspect and maintain the hydraulic station When the control system fails, or the hydraulic system cannot be controlled, or the control system cannot detect the state of the hydraulic system, the filter press will naturally fail to work
Even if it is almost impossible to operate, it is also very dangerous
Therefore, it is necessary to stop the equipment in time
The reason for stopping the filtering equipment may be the blockage of the flow channel in the equipment
When some flow channels in the filter press are blocked, this will prevent the filtrate from entering or discharging from the device, so the filter press will suddenly stop running and stop flowing out of the drain pipe
Here comes the liquid
In this case, even if the filtrate contacts with the filter cloth, filtration separation will not occur
Because there is no differential pressure, the filter press will naturally stop working The article comes from: http://www
ylylj
com  ;