Nano silica ug-sp100

  Nano silicon dioxide nano silicon dioxide has the characteristics of small particle size, many micropores, large specific surface area, high surface hydroxyl content, strong ultraviolet, visible and infrared reflectance
Especially with the improvement of product surface treatment process, the degree of soft agglomeration of nano particles is reduced, and the compatibility with organic polymer materials is good, which widens the application field of products

Technical indicators:

variety	model	average particle size (nm)	bulk density (g/cm3)	purity	Hydroxyl content	UV reflectance
microporous particles	UG-SP100	100± twenty	& lt; zero point one eight	＞99 5	> forty-five	> eighty-five
microporous particles	UG-SP50	50± ten	& lt; zero point one eight	＞99 5	> forty-five	> eighty-five
microporous particles	UG-SP30	30± 5	& lt; zero point one eight	＞99 5	> forty-five	> eighty-five
microporous particles	UG-SP10	10± five	& lt; zero point one eight	＞99 5	> forty-five	> eighty-five

product application:
1
Apply   Materials: on the basis of the original formula of the water-based emulsion paint, after adding 0
3-1% of the total weight of nano silicon oxide (to be fully dispersed), the suspension stability, thixotropy, bonding strength between the coating and the substrate, smoothness and other properties are improved, the drying time is shortened, the artificial accelerated UV aging test time is doubled, the washing resistance is increased from thousands to tens of thousands, and the antifouling property of the coating is also improved

2
Building waterproof agent: nano silica used in building waterproof agent can quickly penetrate into the interior of building materials, block the pores, form a three-dimensional network structure, and become a waterproof layer with excellent performance
The anti-aging and waterproof performance are improved, so that the building is impermeable, moldy, moss free, frost crack resistant, weathering resistant, etc
, showing a series of unique properties

3
Adhesive: nano silicon dioxide used in adhesive can improve adhesive strength
The tensile strength and elongation increased by 21% compared with those without nano silica filler respectively; And 23% 
When 1
6%-2
0% nano silica is added to the glue, the viscosity of the glue can be increased by 300-400mpa• s
At the same time, it also improves the adhesive strength and initial adhesion

4
Ink jet printing and photo paper: the coating is made of nano silicon dioxide to form extremely fine inorganic organic composite particles
After printing, the ink is immediately absorbed by micro pores similar to honeycomb
The coating has strong ink absorption and can also show a good sense of hierarchy for printing parts with very deep colors; It dries quickly
You can touch it directly when you come out of the printer; The coating material is very fine, which not only has high brightness, but also can match high-precision photo printing
It has a good waterproof performance, even if it is immersed in water for several hours, it can remain the same
Its advantages are “ Three high and one fast ”: Namely, high gloss, high waterproof, high ink absorption and quick drying

5
Ceramics: nano SiO2 is used to composite ceramic substrate, which not only improves the compactness, toughness and smoothness of the substrate, but also reduces the sintering temperature
The main performance indicators reach or even exceed those of products produced in the United States, Japan and other countries

6
Other aspects: adding nano silica in the processing of vinyl fiber fabrics can change the properties of vinyl and play a role in extinction
On audio and video tapes, nano silica is used as an anti adhesion agent
In the bulb industry, lining the inner wall of the bulb with nano silica interference film can improve the luminous efficiency of the bulb and prolong the service life of the bulb
Adding surface treated nano silica to Plexiglas  , It can improve the UV radiation resistance and impact strength of the material
In the battery industry, nano silicon dioxide is used as isolating agent
In the catalyst industry, nano silica is used as a carrier
In addition, nano silica can be used to prepare thermal insulation materials

Dosage: the recommended dosage is 1-5%
The customer can test and select the appropriate dosage according to the specific situation

Packaging:   10kg / bag
 
  Mobile:   15250530769  QQ ： 2627641374