Hydrophobic nano silica hardener and weare

  Hydrophobic superfine silica powder is prepared by in-situ surface modification of the powder with special imported additives and processes according to the characteristics of different matrix materials
Hydrophobic superfine silica powder has good interfacial compatibility with the base resin, can be evenly dispersed in the base resin, and closely combined with the polymer system to improve the performance of polymer materials
Product features
1
good interfacial compatibility with resin &mdash& mdash; Anti sedimentation, improve the decline of mechanical properties of composites caused by high filling

2
special surface treatment, powder self flowing &mdash& mdash; It is beneficial to the dispersion under shear, reduce the viscosity of the resin blend and optimize the processability

3
high temperature resistance, low coefficient of thermal expansion &mdash& mdash; Reduce the thermal expansion coefficient and curing shrinkage of the composite, improve the thermal deformation temperature of the polymer and the dimensional stability of the product, ease the internal stress concentration of the composite, and improve the mechanical properties

4
excellent electrical insulation &mdash& mdash; The fluidization purification process reduces the content of impurity ions, makes the composite have good insulation and arc resistance, and reduces the water absorption of the cured product

5
high hardness &mdash& mdash; Improve the hardness, strength and wear resistance of the composite, but pay attention to its wear on the equipment
It is recommended to carefully adjust the equipment operation parameters

6
weather resistance and migration resistance &mdash& mdash; It is inert and will not change or induce metamorphism in the presence of catalyst or multi-component system

technical parameter

Project model	main ingredients	coefficient of thermal expansion 1/K	resistivity ω	particle size d50μ m	features	whiteness%	moisture content%	pH value	surface status
UG-SP10s	SiO2	14× 10-6	1014	0 01	nano high dispersion	ninety-five	≤ zero point three	6－8	drainage

  Application reference
Silicone rubber (mold glue, handle glue, key glue, etc
), copper clad laminate, electronic potting glue, epoxy resin castable, plastic sealing material, LED packaging material, electronic components, high-performance adhesives, powder coatings, super hard wear-resistant coatings, functional insulation coatings, anti-corrosion coatings, special paint inks, high heat-resistant resins and various functional polymer products

Instruction for use
1
  The single use shall be selected according to the performance requirements of the product
The particle size is closely related to the properties of the composite
The smaller the particle size, the better the surface fineness and the better the reinforcement effect
However, the greater the viscosity during blending
Please carefully adjust the formula to balance various properties

2
  Using different particle size hybrid filling, dense filling can be formed in the polymer system at an appropriate proportion
The reasonable composite system can avoid the settlement or floating of filler, and reduce the viscosity of the resin blend with the same amount of filler, which is beneficial to shear dispersion

3
  After ultra-fine silicon powder, it is easy to agglomerate due to the increase of specific surface area and poor compatibility with polymer, so it is difficult to disperse uniformly, which affects the physical properties of the composites
Hydrophobic micro silicon powder has good interfacial compatibility with polymers
The surface coating can bond with the base resin groups, reduce the viscosity of the blends, eliminate interfacial stress concentration, and improve the mechanical properties of the composites
Due to the different surface groups of different types of hydrophobic products, the applicability of the resin system will be slightly different
It is recommended to carefully evaluate or contact our company

4
  It is recommended to determine the appropriate addition amount   through experiments;

matters needing attention
This product should be stored in a cool, dry and ventilated place to prevent moisture on the ground
During transportation, it is required to be waterproof and pressure proof
It is required to load and unload with care to prevent package damage
When the relative humidity of the environment exceeds 80%, avoid exposure to the air
If necessary, use it after baking (110 ℃)
Sealing and moisture-proof measures shall be taken after use
It is recommended that the package be unpacked and used at the same time
Youzr nano materials Co
, Ltd
  Mobile:   15250530769  QQ ： 2627641374