Mining material truck mining material truck mlc5-9 material truck

  Mlc5-9 material truck product introduction mlc5-9 material truck, also known as material truck, is suitable for underground mining mines and transporting support materials and other materials along underground roadways and surface industrial sites
Mlc5-9 material vehicle (hereinafter referred to as material vehicle) is a vehicle for transporting pit wood, support or other materials by narrow gauge railway in coal mine ground and underground roadway
The model number of MLC 5-9 material is composed of English capital letters and Arabic numerals
The main data described are the model, trunk volume and gauge of coal mine vehicles
The order of letters and numbers is fixed
The meaning of mlc5-9 is as follows:
M - for coal mine vehicles
L - indicates material
C - for coal mine vehicles
5 - indicates the deadweight ton of the mine car
9 – Indicates gauge 900mm
Precautions for operation and maintenance of mlc5-9 material truck material truck is the main transportation and safety equipment for the transportation of main roadway and working face
During operation, it shall ensure that the wheel, buffer spring, single ring chain, three ring chain, pin shaft, bumper core and other protective devices are always in good condition
During daily operation and maintenance, attention shall be paid to the following main contents:
1) For the chain link bearing traction, the wear of pin shaft shall not exceed 15% of the original size, and the value of chain link bolt bending shall not exceed 10% of the diameter

2) The cast steel connector shall not have cracks, and the buffer spring shall not be broken or deformed for a long time

3) The material vehicle shall operate stably, and the diameter difference between the tread of two wheels of the same wheel set shall not be greater than 2mm; When one of the four main wheels of the same material vehicle does not contact the rail surface on the flat road, the clearance shall not be greater than 2 mm, otherwise the operation shall be stopped immediately for repair or adjustment

4) The wheel shall be free of cracks, the rim wear residual thickness shall not be less than 13 mm, and the tread residual thickness shall not be less than 7 mm

5) The wheels should be oiled once every two weeks
When filling, the new oil must eject the old oil

6) The steering device shall be flexible and reliable, and shall rotate flexibly in both horizontal and vertical directions

Technical parameters of mlc5-9 material car volume of mlc5-9 material car: 5m & sup3;
Mlc5-9 material truck load: 5T
Mlc5-9 material vehicle gauge: 900mm
Mlc5-9 material vehicle wheelbase: 1100mm
Wheel diameter of mlc5-9 material vehicle: 350mm
Mlc5-9 material vehicle traction height: 320mm
Overall dimension of mlc5-9 material car: 3450 * 1320 * 1300mm