Low power rainfall recorder Pingao electronic pg-210 digital rain gauge

  Pg-210/yl rainfall recorder
Model: pg-210/yl  Brand: Pinko Electronics
  Product introduction
Rainfall recorder, meteorological detection series microcomputer data recorder, which integrates sensing technology, computer technology and communication technology
The micro power MCU is used to sample the external data, and the collected data are stored in the nonvolatile memory of the system
Communicate with PC through RS-232 or USB interface
Download the data stored in the recorder, and analyze and print the data

application area
It can be widely used in meteorology, agriculture, industrial automation engineering, intelligent building systems, workshops, warehouses, museums, laboratories, greenhouses and other applications
Technical parameters:
technical parameter
l 
Measuring range: 0 ~ 50mm/ hour
l 
Measurement accuracy: ± 0
2mm
l 
Resolution: 0
2mm
l 
Recording interval: 1 minute ~ 24 hours
l 
Water bearing diameter: φ 200mm
l  Communication interface: RS-485 or USB
l  Soft   Copy: Chinese Version (complimentary)
l 
Data export: 485 interface to facilitate data presentation
l  Recording capacity: 10000 pieces
l  Power supply voltage: 12V
l  Working environment: ambient temperature: -20 ~ 50 ℃; Relative humidity& lt; 95%(40℃)
Functions and features
Ø 1
Small size, simple operation, reliable performance, whole process * recording rainfall data, long recording time
Ø 2
The software has powerful functions and is convenient to view data
Rainfall data can be output in PDF format, which cannot be modified
It can provide the most original rainfall data in hydrological stations, environmental protection, agriculture, forestry and other departments, and can also automatically generate excel tables to facilitate printing records

Ø 3
The recording time interval can be set from 1 minute to 24 hours

usage method
u  1
Open the computer, put the attached CD into the CD drive and install the recorder application software (see the product operation manual for details)

u  2
Connect the sensor with the recorder (see the product manual for the specific sensor connection method)

u  3
Connect the recorder to the serial port of the computer with a communication line
(the computer without serial port can connect the recorder to the computer through USB to serial port)
u  4
Run the application software of the recorder on the computer, start the recorder, and set the recording start time, recording cycle, stop time, stop mode and other parameters of the recorder (see the software operation manual for the specific software use method)

u  Note: select normal mode / power saving mode according to the time interval you set
It is recommended to work in power saving mode

u  5
After the setting is completed, disconnect the recorder from the computer, place the recorder in the place that needs to be detected, and the recorder starts to record automatically (or it can not work offline, and display the changes of the measured parameters on the computer in real time)

u  6
After the detection, connect the recorder (if the sensor is inconvenient to move, it can be disconnected from the sensor) to the computer, run the recorder application software, and download the recorded data to the computer for data processing