Marine marine wind speed and direction warning instrument Pingao electronic pg-510

Pg-510b/fs wind speed alarm
 
  Type   No
: pg-510b/fs product   Brand: Pinko Electronics
Product introduction
The wind speed alarm instrument is composed of a microprocessor and a wind sensor with high dynamic characteristics
It can observe the instantaneous wind speed and the average wind speed of two minutes and ten minutes in the atmosphere, and has the wind speed alarm setting and alarm output control functions; The wind speed alarm adopts double screen display output, and the wind speed display adopts high-intensity LED digital tube display
The observation distance is long, and it is suitable for dark light and night use
The parameter setting adopts graphical LCD display, with friendly man-machine interface; The wind speed alarm is equipped with an audible and visual alarm
When the wind speed exceeds the limit, the alarm will send an audible and visual alarm to remind the operator to pay attention to safety, and generate a circuit of relay switching value output

application area
Wind speed is measured at meteorological, energy, environmental protection, hydrological monitoring stations, agriculture, forestry, ships, wharves, aquaculture and other environmental and military sites

Product overview
The wind speed alarm instrument is composed of a microprocessor and a wind sensor with high dynamic characteristics
It can observe the instantaneous wind speed and the average wind speed of two minutes and ten minutes in the atmosphere, and has the wind speed alarm setting and alarm output control functions; The wind speed alarm adopts double screen display output, and the wind speed display adopts high-intensity LED digital tube display
The observation distance is long, and it is suitable for dark light and night use
The parameter setting adopts graphical LCD display, with friendly man-machine interface; The wind speed alarm is equipped with an audible and visual alarm
When the wind speed exceeds the limit, the alarm will send an audible and visual alarm to remind the operator to pay attention to safety, and generate a circuit of relay switching value output
The instrument adopts a wall mounted waterproof box, which is easy to install, occupies a small space and has high reliability
The instrument is characterized by light weight, convenient installation and use, accurate wind speed measurement, intuitive and clear digital display
It is an indispensable wind speed detection instrument for the operation safety guarantee of large and medium-sized tower cranes, hoisting machinery, hanging baskets, cableways and cable cars

technical parameter
l  Wind speed range: 0~60m/s
l  Wind speed accuracy: ± 1m/s
l  Wind speed output signal: pulse (each pulse corresponds to 1
2m/s)
l  Wind speed load capacity: ≤ 500Ω
l  Upper and lower limit alarm response time of wind speed: < 100mS
l  Alarm mode: audible and visual alarm
l  Working environment: -20 ℃ -- 80 ℃
l  Power consumption of the whole machine: the average working current is about 20mA
l  Power supply: 220v-dc12v
Use environment
v  Host temperature: - 10 ~ 50 ℃;
v  Humidity: 20% ~ 90%rh;
v  Probe temperature: - 22 ℃ ~ +50 ℃
v  Output capacity of alarm relay: 1A 220VAC
 
Product features
Ø Convenient operation: the whole machine has only four buttons, which can realize all settings and viewing functions
The operation is very simple

Ø Visual display: the panel displays the wind speed and direction data in two areas, and the wind direction data is indicated by the wind vane

Ø Strong function: it has the display function of wind speed, wind force and wind direction, and can make up and down over limit alarm output according to wind speed

Ø Sensitive response: the relay can output alarm information quickly according to the set upper and lower limit of alarm, and the delay is less than 100ms

Ø Power consumption control: Although the system uses LED display, the power consumption of the whole machine is less than 30mA under effective power management

Site installation, commissioning and use  
Ø 1
Installation instructions:
Ø Installation of wind sensor:
Ø a
The wind speed sensor shall be installed on a bracket at a height of 500-600mm from the horizontal plane to the ground or the ship deck

Ø b
Diameter of mounting flange under sensor Ф 60mm, four mounting holes Ф 6mm, fixed with flange

Ø 2
Instructions for use:
Ø During normal operation: the window displays the current real-time wind speed;
Ø When setting operation: the window displays the wind speed alarm control value;
Ø When the preset alarm wind level is reached, an alarm sound will be given;
Ø 3
Set alarm:
Ø a
During normal use, the alarm value and power-off value of wind speed have been set before leaving the factory, i
e
11m / s alarm and 13m / s power-off respectively
If the customer has other requirements, they can be informed before leaving the factory, and we will reset them

Ø b
Press the wind speed and wind power conversion key to display the current actual wind power level