Hengtai building materials adopts steel wood keel

  The steel wood keel is mainly used to support and fix the building formwork
It is more common in buildings
It replaces the traditional wood keel
The steel wood keel is a steel product, which adopts thin-walled square steel pipe with high strength and flatness
The wood in the steel wood keel is mainly processed into rectangular or square wood strips with cross-section from pine, basswood, Chinese fir and other trees, so it exceeds the use effect of wood, Increased strength
It is used as the vertical edge of the formwork, which directly contacts the formwork
After the installation of the vertical wall formwork, it can be directly vertically arranged in parallel according to a certain spacing to support the formwork
Because the square steel pipe contains wood cube and is processed by technology, no matter the internal corners, formwork joints and roof exceed the wood cube Steel wood keel as secondary ridge of wall formwork has the following advantages:
1
The secondary ridge is a steel product, and the thin-walled square steel pipe is selected, which has high strength and flat, so it exceeds the application effect of wood square and increases the strength
It is used as the vertical edge of the formwork
Directly touch the formwork
After the installation of the vertical wall formwork, it can be directly arranged vertically and parallel according to the specified distance, so as to achieve the effect of formwork support
Because the square steel pipe contains wood cube and is processed by technology, the internal corners, formwork joints and roof exceed the application function of wood cube
2
The secondary ridge can be connected with the formwork through nails, and the round hole of the bar body can be opened on the secondary ridge body, so as to facilitate the workers' independent operation and hoisting operation during construction 　
3
The dimension is more standard than that of wood square
Due to the high flatness and strength of the secondary ridge, the concrete forming quality is greatly improved and fully meets the requirements of fair faced concrete 　
4
Save labor, no cutting and sawing, just discharge
The steel wood keel should have high flatness and reduce nail nailing, which should be convenient for formwork removal, so it saves labor 　
5
The service life is long and the turnover times are more than 40 times that of the timber, so the project cost is reduced
6
The applied quantity is less than the applied wood square
Because the width of steel wood keel is larger than that of wood square, the load of steel wood keel is large, and it is not afraid of breaking, so the distance can be increased
After calculation, the keel distance can reach 3500 Welcome to Shenzhou Hengtai