Gzy20 mine flameproof hydraulic load cell is mine intrinsically safe

  Gzy20 mine flameproof hydraulic load cell is mine intrinsically safe
I am Dongda mine safety salesman: Manager Wang , Tel: 13325190775 (same as wechat)
Company name: Shandong Dongda electromechanical Co
, Ltd
Address: South Shanbo road and West Zhixue Road, Jizou Science Park, high tech Zone, Jining City, Shandong Province
Gzy20 mining flameproof hydraulic load cell, main shaft loading equipment hydraulic load cell, 20t hydraulic load cell, skip quantitative bucket hydraulic load cell
Installation and commissioning of gzy20 mining flameproof hydraulic load cell
When the sensor is used, an appropriate amount of hydraulic oil must be added to ensure the normal use of the hydraulic structure
This product must be installed on a horizontal plane and kept horizontal when there is load, so as to prevent the sensor from being damaged due to uneven load distribution caused by inclination
First connect the incoming and outgoing cables and confirm that there is no problem, then lay the cables according to the construction standards and connect the related equipment
Before connecting the wire cover, it must be checked
The cable should be connected according to the connection mode on the manual or drawing, and ensure that the lead on the terminal is crimped firmly and reliably
The sensor is of mine intrinsic safety type
After installation in the underground site, ensure that the wire nozzles have been fastened
And the order of not using the thread nozzle is glue gambling and live blocking

Working principle of gzy20 mining flameproof hydraulic load cell:
When the piston of the hydraulic weighing sensor of the quantitative bucket is affected by the gravity of the skip or other measured objects, the hydraulic oil pressure in the confined space around the piston increases, and the increase degree of the hydraulic oil pressure in the confined space is directly proportional to the applied force
The change value of the pressure force is measured by the pressure transmitter, and the mass of coal or other objects in the measured skip can be calculated

The hydraulic weighing sensor of coal mine quantitative bucket is used for handling and lifting
Most of the coal in China's coal mines use skip for lifting
In order to ensure the safety and efficiency of the lifting process, the amount of coal in the lifting skip must be * * * controlled
After the butt joint of the lower section of quantitative bucket and the upper section of quantitative bucket is completed, the chain block is used to tighten the butt joint inside each component, which is connected with screws, and then an electric welding machine is used to weld a wrapped angle iron

Product features of gzy20 mining flameproof hydraulic load cell
This product is developed from imported integrated circuits and electronic components, and is based on the coal mine safety regulations and in accordance with GB According to the specified design of 3836-2010, gzy20, 32, 40 and 66 mining flameproof hydraulic load cells (hereinafter referred to as sensors) are flameproof electrical equipment, Purpose: the sensor can be used for weighing information collection in places with gas and coal dust explosion danger under the coal mine, and can also be used for weighing information collection in metallurgical mines, open-pit coal mines, ports and docks, coal preparation plants, power plants and other harsh environments