Factory direct selling of portable conveyor of light belt conveyo

  Light belt conveyor
Brief introduction:
Light belt conveyor is a kind of conveyor, which is suitable for food, chemical industry, medicine, warehouse, grain, wharf and other industries
With the characteristics of light load and low linear speed, it can continuously transport materials

Light belt conveyor: light belt conveyor is a kind of conveyor, which is suitable for food, chemical industry, medicine, warehouse, grain, wharf and other industries
It has the characteristics of light load and low linear speed, and can deliver materials continuously
The conveyor belt adopts white or green food grade conveyor belt, which is durable, clean and sanitary
In the model selection design, it is selected after checking and calculating according to other conveying capacity and conveying distance (including horizontal length and lifting height)
Combined length of light belt conveyor (horizontal distance between head and tail pulley) l≤ 30m
Technical parameters:
1
the machine type is divided into flat type and groove type
Flat type: used for b=100~500mm; Groove shape: bracket groove angle &lambda= 15°， Only for b=300~500mm

2
the distance between upper idlers shall be 500mm and 1000mm

3
bandwidth specification: b=100mm, 150mm, 200mm, 250mm, 300mm, 400mm and 500mm

4
the middle frame is of thin-walled steel structure, and its standard length is 1000mm, 1400mm and 2000mm, which can form conveyors of different lengths
Drive unit:
The light belt conveyor is equipped with three kinds of driving devices, namely worm driving device, cycloid pinwheel reducer driving device and ultra light air-cooled electric roller
It is recommended to select extra light air-cooled electric roller
When overhead belt conveyor is used, only air-cooled electric roller can be selected

Installation requirements:
The layout of light belt conveyor is divided into overhead type and ground type

1
When the overhead belt conveyor is selected, its head and tail ends shall be fixed on the nearby equipment or floor with rigid supports, and the length of the extended cantilever shall not exceed 1000mm

2
The driving device shall be firmly installed on the rigid support or head frame of the head without shaking during operation

3
The installation technical requirements for head and tail wheels, upper and lower brackets, conveyor belts and frames are the same as those for ordinary belt conveyors