Feeder swing rod feeder Guangxi Liuzhou swing feede

Feeder   Swing bar feeder Guangxi Liuzhou swing feeder
Pendulum feeder, also known as pendulum feeder, is a kind of auxiliary equipment of transportation machinery
It is suitable for conveying small pieces of materials with large specific gravity according to a certain amount, and its feeding particle size is below 35 ~ 100 mm; Not suitable for viscous materials

The tilting feeder is suitable for mineral processing, coal, chemical and other departments to send granular materials from the storage tank to various types of receiving devices through the hopper
Tilting feeder is not suitable for conveying dry powder or too large particle size materials, otherwise dust pollution and blockage of discharge outlet will occur

Pendulum feeder structure:
  The pendulum feeder is composed of a swinging jaw, a crank connecting rod, a driving device, a base, etc
It is generally installed on the discharge port of the ore bin

Working principle of tilting feeder:
  The swing times of valve fan are generally 45 ~ 50 times / min
When the valve fan retreats, the material is discharged from a gap formed between the valve fan and the valve body
This clearance is determined by the eccentricity of the deflection wheel
The adjustment range of eccentricity varies depending on the specification of the feeder

The V-belt reducer of the pendulum feeder forces the motor to decelerate, and the decelerated power is transmitted to the eccentric wheel with adjustable eccentricity
Then, the eccentric wheel drives the swinging base plate, and the connecting rod swings, and the ore
The ore in the silo passes through the inner cavity of the feeder body and is discharged out of the mill from the discharge port at a constant speed time and time again to ensure uniform feeding to the ball mill

If you want to adjust the ore feeding amount of the feeder, you can change the length of the swing stroke
Thus, the feeding amount can be adjusted in a large range, the height of the discharge gate can be adjusted, and the size of the discharge port can be changed, so as to accurately adjust the feeding amount