Zkc127 mine driver controlled turnout device electric driver controlled turnout device

  Zkc127 mine driver controlled turnout device electric driver controlled turnout device zkc127 mine driver controlled turnout device * * *; Manager Wang of Shandong Dongda electromechanical Co
, Ltd
13325190775
Zkc127 mine driver controlled turnout device (coal safety No
: mhd090032) is mainly applicable to the automatic control of underground roadway turnout in coal mine, replacing & ldquo; Manual switch & rdquo;
The automatic control device is that the electric locomotive driver uses the transmitter (or button) to control the turnout position, and there is a turnout position display above the turnout to display the turnout position
The device has the advantages of simple structure, reliable operation and convenient maintenance, which effectively improves the working conditions and transportation efficiency

Working principle of driver controlled turnout device
1
PLC control system: when the controller receives the signal from the transmitter (or button), it can control the action of the actuator (air cylinder or oil cylinder) and pull the turnout
When the switch lever is in place, the display shows the switch position

2
Display function: the display can correctly display the current position of turnout

3
Prompt function: when both sides of the turnout are not in place, the display does not display the turnout position

4
Remote control distance of transmitter: 0 ~ 50m (no shelter), remote control angle: 0 ~ 300

5
High switch action sensitivity, action time: ≤ 3s。
Main composition and technical parameters of driver controlled turnout device
Zkc-127k controller for driver controlled turnout device
1
Rated working voltage: AC 127V
2
Rated power: 40W
3
Intrinsic safety parameters: U0: DC12 5V，I0：1A
Zkc-12f transmitter for driver controlled turnout device
1
Rated working voltage: DC 12V
2
Rated working current: ≤ 30mA
3
Effective launching distance ≤ 50m
Zkc-12x display for driver controlled turnout device
1
Rated working voltage: DC 12V
2
Effective display distance ≤ 30m
3
Display mode: LED light composition Icon
Guc15 mining intrinsically safe position sensor
1
Rated working voltage: DC 12V
2
Contact capacity: DC12 5V/1A
3
Effective sensing distance: ≤ 15㎜
Ahs-12 mining intrinsically safe control button
1
Rated working voltage: DC 12V
2
Rated working current: ≤ 5mA
3
The button is normally open
Cfhc10-0
8 mining intrinsically safe pneumatic solenoid valve
1
Rated working voltage: DC 12V
2
Rated working current: ≤ 266mA
3
Input air pressure: 0
2 ~ 0
8MPa