Ywx-150 salt spray corrosion test chamber manufacturer's corrosion test equipment

  Salt spray corrosion test chamber: one year warranty, final in-depth maintenance and regular return visit Executive standard: refer to GB / t2423 17-93、GB/T10587-2006、GB/T6461-2002、GB10125-1997、GJB150
11-86、 GB 6458、GB 6459、GB6460、GB 5938、GB 5939、GB 5940、GB 1771； Acceptance standard: GB 5170 , 1、 Test chamber structure 1 The inner and outer shells are made of imported 6-10 mm PP plastic plates, which are softened at high temperature and then cooled by a special mold
The joint between the plates is planed and milled into a 90 degree right angle, and then filled with high-temperature welding and melting plastic welding wire
After cooling, the weld is more firm, the joint of the whole box is smooth and flat, the box structure is compact and the appearance is bright
2
the spray method of the equipment is to use the built-in glass non crystallization nozzle to place in the round plastic pipe
The spray is guided by the tower pipe, and then dispersed to the laboratory through the conical disperser
The fog diffuses evenly and settles freely in the test chamber
The fog falling and receiving on all sides are completely consistent, and there are a large number of test pieces
3
the brine before spray is injected into the preheating tank through the brine storage tank (on the left side of the equipment, the capacity can be designed according to the customer's requirements), and then it is preheated and led to the spray tower
The temperature fluctuation of the working room after constant temperature is smaller
The storage tank adopts a hidden attached water level gauge, which is easy to clean and not easy to crack
4
The temperature of this series of test chamber adopts the heating mode of bottom water, which makes the temperature of the chamber more uniform and stable
5
The heating element adopts titanium heating tube, which is salt resistant, corrosion resistant and long service life
6
The box cover adopts imported 6-10mm PVC transparent plate, and the box cover can be opened and closed easily
The water sealing structure is adopted to ensure that the salt mist does not overflow
7
The box cover adopts an included angle of 110O ~ 120o to ensure that condensate does not drip on the test piece, and the box is equipped with pressure balance hole and condensate discharge hole
8
Automatic mist discharge function
9
The sample frame structure design is reasonable, & ldquo; V” Shaped groove + strip bar, 15 degree and 30 degree angle design, convenient angle adjustment, large bearing weight and easy placement of test objects
10
Double overtemperature protection is attached, and the water level is insufficient to ensure safe use
11
The saturated air tank adopts Henry's law to heat and provide the humidity required by the test chamber
2、 Main technical specifications and parameters of the equipment 1
Specifications , Studio size , Overall dimension , Power , YWX-150  D450*W600*H400  D700*W1150*H1000  1
3kW  YWX-250  D600*W900*H500  D850*W1450*H1150  2
0kW  YWX-750  D750*W1100*H550  D1050*W1650*H1200  2
5kW  YWX-010  D850*W1300*H600  D1150*W2000*H1350  3
5kW  YWX-016  D850*W1600*H600  D1150*W2350*H1350  4
5kW  YWX-020  D900*W2000*H600  D1200*W2800*H1400  6
5kw2
Material: PVC gray board of box body, transparent pvc3 of box cover, temperature range: RT+10℃～+50℃  Saturation temperature of cylinder: 70 ℃ ~ + 4 ℃& plusmn; 2 ℃ 5
Temperature fluctuation: & plusmn; 0
5 ℃ 6
Salt spray sedimentation: 1
0-2
0ml/80cm2 H7
Salt spray concentration: 5 & plusmn; 0
5% 8
Humidity range: & Ge; 95% RH9, air pressure: 0
2 – 0
4mpa10
Spray pressure: 0
05 ~ 0
17 mpa/cm211
Spray method: pneumatic, continuous and intermittent spray can be adjusted at will
12
Test time: 0— 999 h, m and s adjustable 13
Cycle time: 0-99 h, m and s adjustable 14
Sample rack: meet 15 & mdash; 30 degree tilt 15
Test method: neutral salt spray test, acid salt spray test, copper accelerated salt spray test 16
Operating ambient temperature: , 10 ℃～ 35 ℃ 17
Ambient humidity: ≤ 85%； 18
Power requirements: AC 220V, , 380V three-phase five wire system 3、 Salt spray test chamber control system 1 Temperature controller: imported digital display temperature controller
2
Sensor: PT100 test sensor 3 Time relay: 1s ~ 9999h adjustable; Double position time relay, 0
1 ~ 99 hours, the spray stop time can be set arbitrarily 4 Executive components: Schneider AC contactor, small relay, solid state relay 5 Gas circuit system: stable and reliable gas circuit components IV
spare parts and technical data of salt spray test chamber 1 Provide spare parts (vulnerable parts) necessary to ensure the safe, stable and reliable operation of the equipment within the warranty period
2
Provide operation and operation instructions, instructions of accompanying main accessories, general structural drawing, packing list, spare parts list, electrical schematic diagram and structural diagram, as well as other relevant data required by the buyer for the correct use and maintenance of the equipment Anhui Tarant salt spray corrosion test chamber manufacturer / salt spray corrosion test chamber / salt water spray tester / salt spray chamber / salt spray tester / test chamber   Building 64, No
999, Yinhuang East Road, Ma'anshan economic and Technological Development Zone YWX-150  PP board