Manufacturer of constant temperature and humidity test chamber with new principle

  Constant temperature and humidity test chamber product purpose:
Programmable damp heat alternating test chamber, thermostat or constant temperature and humidity chamber are used to test the performance of materials in various environments and to test the heat, cold, dry and moisture resistance of various materials
It is suitable for testing the quality of electronics, electrical appliances, mobile phones, communications, instruments, vehicles, plastic products, metals, food, chemistry, building materials, medical treatment, aerospace and other products

 
Meet the following standards:
GB / T 5170
5-2008 environmental test equipment for electric and electronic products -- Inspection Method -- Damp heat test
GB / T 10586-2006 technical conditions for damp heat test chamber
GB / T 2423
1-2008 environmental testing of electric and electronic products Part 2 test methods test a
GB / T 2423
2-2008 environmental test for electric and electronic products test B: basic information on high temperature
GB-T 2423
3-2006 environmental testing of electric and electronic products Part 2: Test methods
GB / T 2423
4-2008 environmental testing of electric and electronic products Part 2: Test methods Test DB
Machine parameters:

inner box volume		80L	100L	150L	225L	408L	800L	1000L
Studio size （DWH）（cm）		40× 40× fifty	40× 50× fifty	50× 50× sixty	50× 60× seventy-five	60× 80× eighty-five	80× 100× one hundred	100× 100× one hundred
weight		180	200	250	300	550	960	1100
Security can	temperature and humidity regulation method	balanced temperature and humidity regulation PID intelligent regulation
	temperature range	minimum test temperature: 150 ℃; Minimum test temperature type a 0 ℃ Type B - 20 , Type C - 40 , Type D - 70 ℃
	humidity range	20%～98%R· H
	temperature uniformity	± 2℃
	temperature fluctuation	± 0 5℃
	humidity uniformity	± 3%R· H
	heating rate	≥ 2℃/min
	cooling rate	≥ 1～1 5℃/min
material	inner box material	SUS304 mirror stainless steel
	shell material	SUS304 brushed stainless steel plate or rust resistant cold rolled steel plate
	insulation heat break	polyurethane foam plastic composite assembly board
control system	heater	nichrome electric heater
	humidifier	stainless steel armored humidifier
	air intake system	centrifugal fan
	refrigeration mode	Mechanical single-stage refrigeration
	cooling method	air cooling
	refrigeration compressor	imported totally enclosed compressor (Taikang, France)
	refrigeration heat exchanger	fin heat exchanger, stainless steel brazed plate heat exchanger
	operation interface	imported single point controller
	operation mode	constant operation
	program memory capacity	the last set operating temperature and humidity value can be memorized
	resolution	temperature: 0 01 ℃; Humidity: 0 1% R & middot; H
	Enter	PT100 or T-type thermocouple
	communication function	none
	printing function	Yokogawa 6-point recorder (optional)
	standard configuration	one observation window; One test hole (60mm); two layers of sample rack; one lighting lamp in the box; one water supply box; one weather belt for wet ball; four small feet
	safety device	overtemperature protection, dry burning protection (humidification system), water shortage protection, leakage protection, compressor overpressure, overload, overcurrent protection, fan overload protection, phase sequence protection
	ancillary functions	upper and lower limit alarm, self diagnosis, alarm display (fault cause), timing device (automatic shutdown)

 
Precautions for machine:
1
In order to avoid machine failure of constant temperature and humidity test chamber, please provide power supply within the rated voltage range

2
In order to prevent electric shock or misoperation and failure, please do not turn on the power supply before the installation and wiring are completed

3
This product is non explosion-proof
Please do not use the constant temperature and humidity machine in the bad environment with combustible or explosive gas

4
Please try not to open the door of the test chamber during the operation of the instrument
Opening it at high temperature may cause scald to the operator, and opening it at low temperature may cause frostbite to the staff in the morning, and may cause icing of the evaporator and affect the refrigeration effect
If it must be opened, please do some protection work,
5
It is forbidden to disassemble, process, transform or repair the constant temperature and humidity machine without authorization, otherwise there will be danger of abnormal action, electric shock or fire

6
The ventilation hole of the machine body shall be kept unobstructed to avoid failure, abnormal action, reduced service life and fire

7
If the machine is damaged or deformed during unpacking, please do not use it

8
During the installation and setting of the machine, pay attention not to let dust, thread ends, scrap iron or other things enter, otherwise wrong actions or faults will occur

9
The wiring must be correct and grounded
Non grounding may cause electric shock, wrong action accident, abnormal display or large measurement error

10
Regularly check the terminal screws and fixing bracket
Please do not put them in the loose position