Y-type double-layer skirt guide groove skirt polyurethane baffle

  Product Name: double layer anti overflow skirt / coal baffle / skin protector, anti overflow skirt, polyurethane rubber plate, guide chute baffle
Material composition: rubber, polyurethane
Storage method: it should be dried at room temperature to avoid acid and alkali
Common size: Y type: 100-400mm Thickness: 10-20mm (customized according to customer requirements)
T type: 100-300mm Thickness: 10-20mm (customized according to customer requirements)
The length can be customized according to customer requirements
Installation method: cooperate with the anti overflow skirt retainer for installation, and one meter is equipped with beam sleeve retainer

Skirt material: it is made of polyurethane and rubber, and the part in contact with the belt (playing the main sealing role) is polyurethane
Polyurethane is made of powder casting, which has better wear resistance, longer service life and no damage to the belt than polyurethane made by extrusion process

Skirt on each side of the guide chute - anti overflow skirt shall be made into a whole as required, which is the same length as the guide chute to prevent air leakage at the joint

There are generally three types of anti overflow skirts: straight, y and t
among them, straight anti overflow skirts are single-layer sealed, and Y and t anti overflow skirts are double sealed
In terms of sealing performance, double sealed anti overflow skirts are simply selected
When purchasing anti overflow skirt, customers only need to provide the type, width and thickness of anti overflow skirt, which has nothing to do with the model of guide chute
The width of anti overflow skirt is generally between 150-400mm and the thickness is mostly 15-20
In case of special specifications, we can temporarily open the mold for production, which is large and cheap

 
Technical parameters and requirements
Anti overflow skirt: composite structure is adopted
The rubber hardness of the upper main body is 75-80 degrees, and the rubber hardness of the lower part in contact with the belt is 55-60 degrees

Gripper (including angle aluminum): Q235A surface galvanized or stainless steel, and special-shaped angle aluminum is a high-strength aluminum alloy with surface passivation treatment

The gripper is used with special-shaped angle aluminum, and two sets of grippers are used for each meter of special-shaped angle aluminum
Anti overflow effect
Adopt double-layer sealing design:
The inner retaining edge is the first layer and the outer skirt is the second layer to ensure the negative pressure of dust removal and further enhance the sealing effect; Dust flying between two cavities is suppressed; Its special material will not damage the belt
Traditional sealing strip:
Single layer seal: single rubber plate or waste belt: the grooved hole of rubber plate also causes overflow; Unable to suppress field dust; The sealing strip has the same nature and wear as the running belt, which damages the belt;
Installation and maintenance:
Convenient gripper function, convenient installation, maintenance and operation

  Long tail anti overflow Skirt , Short tail overflow Apron Belt conveyor overflow Apron Flat anti overflow Skirt Guide chute Skirt Belt conveyor baffle , Anti overflow skirt installation Price and size of overflow Apron Rubber spill Skirt , Jining anti overflow Skirt , Polyurethane spill Skirt , Guolong anti overflow Skirt , Guide chute anti overflow Skirt , Double layer composite anti overflow Skirt , Gripper , Spill apron retainer , T-shaped anti overflow Skirt , Polymer anti overflow Skirt High wear-resistant anti overflow Skirt Y-shaped anti overflow Skirt All polyurethane anti overflow skirt
Contact: manager Liu
Mobile phone: 18754797346 (same as wechat)
QQ No
: 2530973981