Static splitting equipment demolition of foundation pit rock equipment splitting machine manufacture

Demolition of foundation pit rock equipment by static splitting equipment Splitting machine splitting machine manufacturers statically dismantle rock equipment for splitting foundation pit, static demolition equipment, static splitting equipment, rock equipment for dismantling foundation pit
Farun hydraulic splitting machine is the product of our * - * industry * - * generation blasting
The hydraulic splitting machine is composed of two parts: hydraulic pump station and splitter
The hydraulic splitting machine is driven by the ultra-high pressure oil cylinder output by the pump station, After mechanical amplification, the split object can be split in a predetermined direction

The hydraulic splitting machine can produce 800 tons of actual splitting force, and can easily break boulders or concrete in a few seconds
Splitting is a good choice for static blasting
Compared with similar foreign products, its price is low (about 1 / 4 of the price of foreign products)
It can replace secondary blasting and
Ideal for manual disassembly

This product is mainly used for:
　　1
Splitting and disintegration of large ore (metal ore and non-metal ore);
　　2
Partial and total demolition of concrete components (cement pavement, machine tool foundation, bridge and house components);
　　3
Rock splitting excavation or demolition of tunnels, ditches and other indoor or narrow spaces:
The breaking and dismantling method of hydraulic splitting machine is a construction method extended from the self-produced high-efficiency hydraulic splitting machine
The method covers rock breaking
Demolition, pavement demolition, slope treatment and many other projects
Hydraulic splitting machine breaking method, if it can be combined under the condition that blasting is not allowed
Close & ldquo; Crushing hammer & rdquo; Working together can create better economic benefits: save time and money!
Methods: when roads and railways meet rocks, cities and villages need to excavate house foundations, and when rocks are large,
The following equipment can be selected for each working point: 3 ~ 4 rock drills (equipped with air compressor), 1 hydraulic splitting machine (equipped with 2 ~ 3 splitters) and 1 excavator (equipped with crushing hammer)
The specific operations are as follows: first clean the soil on the rock, and drill a group of holes on the rock with a rock drill according to the texture of the rock
Each group of holes depends on the number of splitters
The hole spacing can be determined according to different rocks, generally about 80cm ~ 120cm
After drilling a group of holes, immediately split the rocks of this group of holes, Look at the splitting to determine the position and direction of the next group of holes
A very important feature of the hydraulic splitting machine is that the splitting position of the split body should be in the position of equal resistance on both sides, and one side should not be too thin
In this way, the splitting effect is not obvious
In general, the hole can be drilled from 1m to 1
5m from the free surface
The splitting depth also depends on the rock condition
The better the integrity, the deeper the splitting depth, up to 2 ~ 3M
Because the hydraulic splitting machine can only split the rock, but can not remove the split stone, and the breaking hammer of the excavator is difficult to break the rock on the mountain, but the stone split by the hydraulic splitting machine can easily remove it, and then break the large rock, which is easy to load and unload
Therefore, the combination of hydraulic splitting machine and crushing hammer is safe, efficient and high
Dongguan farun Machinery Co
, Ltd