Special grain elevator ne series plate chain bucket elevato

  Working principle of NE plate chain bucket elevator:
The ne plate chain bucket elevator is an inflow feeding machine
The materials flow into the hopper and are lifted to the top by the plate chain
The materials are unloaded automatically under the action of the gravity of the materials
NE plate chain bucket elevator has many specifications (11 types from ne15 to ne800)
It has a wide lifting capacity, high production energy and low energy consumption
It can gradually replace other types of elevators
The plate chain bucket elevator adopts a fully enclosed casing, with low chain speed and almost no material return
Therefore, it has less reactive power loss, low noise and long service life
Ne series plate chain bucket elevator product features:   1
good sealing performance and less environmental pollution 2
convenient operation and maintenance with few vulnerable parts 3
low use cost
Due to less energy saving and maintenance, the use cost is very low   4
reliable operation and advanced design principle ensure the reliability of the whole machine and good sealing
Less environmental pollution 5
structural port model with high precision
The shell has good rigidity and beautiful appearance after being folded, pressed in the middle and welded 6
the mechanical size is small
Compared with other hoists with the same lifting capacity, the mechanical size of this hoist is smaller 7
the conveying capacity is large
This series of hoists has ne15 ~ ne800 specifications
The lifting capacity range is 15 ~ 800m3/h 8
easy operation, less maintenance and less vulnerable parts
The conveying chain is a sleeve roller chain, which is used for vertical lifting of various powder and block particles Hopper: 1 Cylindrical bucket: the deep bucket and bucket mouth are inclined at 65o, with large depth
It is used for conveying dry, well flowing and well scattered granular materials
Shallow bucket: the mouth is 45o inclined and the depth is small
It is used for moist and flowing granular materials
　　2
Sharp angle bucket: its side wall extends outside the bottom plate to form a retaining edge
During unloading, materials can be unloaded along the groove formed by the retaining edge and bottom plate of a bucket
It is suitable for transporting viscous and heavy block materials
Traction component: 1 Rubber belt: it is fixed at the belt mouth with screws and elastic gaskets
The belt is 35 ~ 40mm wider than the bucket
Generally, the belt conveys materials whose temperature does not exceed 60 ℃, and the heat-resistant belt can reach 150 ℃
　　2
Chain: a single chain bar is fixedly connected to the rear wall of the hopper; The double chain is connected to both sides of the hopper
The chain hoist adopts single chain when the hopper width is 160 ~ 250mm and double chain when the hopper is 320 ~ 630mm
The main disadvantage is that the wear between the chain links is large and the maintenance times are increased NE type plate chain bucket elevator adopts gravity loading and gravity unloading
The chain is a high-quality alloy steel high-strength plate chain, which is wear-resistant and reliable
The drive part adopts hard tooth surface reducer
The hoist is applicable to the vertical transportation of medium, large and abrasive materials (such as limestone, cement clinker and gypsum), and the material temperature is controlled below 250 ℃