Shandong Luchuang produces tension clamp

  Tension clamp (aluminum clad steel) tension clamp is generally applicable to the optical cable when the RTS (rated tensile strength) of the optical cable is greater than 120kn
The remaining terminal towers, tension towers, connecting towers and corners of the optical cable are greater than 25 & deg; The specific configuration of pole and tower connection is: 1 set of terminal pole and tower / tower, and the angle (elevation) of tension pole and tower connection pole and tower is greater than 25 & deg; 2 sets / tower
Composition: inner protective strip pre twisted wire, middle pre twisted wire, outer twisted wire, U-ring connecting bolt
Inner protective wire preformed wire: the material is aluminum clad steel wire, which is the same material as all aluminum clad steel wires of OPPC optical cable
A layer of steel sand is adhered to the inner wall of the preformed wire through high-strength polymer water-soluble environmental protection adhesive to increase the friction with the optical cable
The preformed wire is prefabricated into four sub bundles during production, which is convenient for rapid installation
The preformed wire material of middle and outer tension clamps is selected; Aluminum clad steel wire is pre twisted into a bundle during factory processing, and a layer of firm white corundum sand is adhered to the inner wall, which has reached the condition of reducing the pressure on the optical cable and increasing the tensile grip strength
The user selects the optical cable diameter according to the specification table
, The working tension of optical cable (the tension used by the clamp) shall be equipped with a suitable tension clamp
Composition: inner protective strip pre twisted wire, outer pre twisted wire, U-ring connection