S800 laser methane and ethane leakage detection vehicle

  S800 laser methane and ethane leakage detection vehicle can directly detect the content of methane and ethane in gas and distinguish natural gas and biogas
The system uses a built-in laser to emit two specific wavelength laser beams
The laser beam is only absorbed by methane and ethane
The absorption rate is directly proportional to the concentration of methane and ethane
The concentration of methane and ethane can be known by measuring the absorption rate
Zhengzhou Ruyang Technology Co
, Ltd
contact 4007178808 or 03714 51088
Product features:
Instantly distinguish natural gas and biogas: measure the content of methane and ethane while the vehicle is moving
The detection unit has good selectivity and only reacts with methane and ethane, effectively avoiding the interference of other gases such as automobile exhaust
Using laser detection technology, the response speed is fast, there is no delay, the sensitivity is high, and the accuracy is as high as 1ppm, even small leakage can be detected
The controller has the function of voice reminding the user of the concentration and concentration of methane in the car, and has the function of voice reminding the user of the concentration and concentration of methane in the car
The startup time of the system is short, the detection unit does not need to be preheated, and the self-test is completed at the same time
The integrated detection unit is compact in design, and the main detection equipment is installed in the vehicle, which is not easy to be damaged
Automatic pump suction sampling, professional front pump suction sampling structure design, flexible height adjustment and convenient installation
The composition of the system adopts modular unit design, which can be installed on various forms of vehicles, can be disassembled quickly and easy to maintain
The line inspection speed is fast and the inspection efficiency is improved
It has reliable safety and stability, dustproof, rainproof and shockproof functions
 
Technical parameters:
Test object: methane (CH4) and ethane (C2H6)
Detection principle: pump suction built-in laser detection
Detection range (CH4): 0-50000ppm
Detection range (C2H6): 0-10000ppm
Resolution: 1ppm
Detection speed: it can be measured accurately at the speed of 0-30 km / h, and the maximum allowable detection speed is 50 km / h
Reaction time: laser 0
1s, vehicle 3 seconds
Display mode: liquid crystal display
Alarm mode: voice broadcast
Alarm point: the user can set the alarm value by himself
Power supply: automobile power supply (optional with independent power supply)
Operating temperature: - 30 ℃ to + 75 ℃
Waterproof / protective: IP54