Pizhou explosion-proof fan coil, Yingpeng explosion-proof fan coil

  Product parameters: Yingpeng card type explosion-proof fan coil:
Brand: Yingpeng
Model: bfp-34k
Rated air volume (high, medium and low): 340 /255/170 m³/ h
Noise dB (a): 38
Refrigerating capacity (W): 1980
Heating capacity (W): 2980
Water volume (kg/h): 450
Water resistance (kPa): 12
Power supply: 220v/50hz
Input power (W): 37
Water inlet and outlet pipe: dn3/4
Drain pipe: ø twenty-six
Control mode: remote control or wire control
Weight (kg): 18
Product Description:
  ★  For zone 1 and zone 2 hazardous places;
  ★  BFP series explosion-proof fan coil is applied to IIA, IIb and IIC, and the temperature is t1~t4 group of combustible gas, explosive gas formed by mixing steam and air;
  ★  It is widely used in national defense engineering, petrochemical industry, military medicine, chemical industry, military industry, coating plant, power plant, laboratory, alcohol warehouse, PetroChina, paint room, paint room and other flammable and explosive places

The explosion-proof mark of the whole series of explosion-proof fan coil units is exdmbib Ⅱ BT4

The Executive Standards of this series of products are as follows:
Gb3836
1-2000 electrical equipment for explosive gas atmospheres Part 1: General requirements
Gb3836
2 -2000 electrical equipment for explosive gas atmospheres Part 2: flameproof type “ d”
Gb3836
4 -2000 electrical equipment for explosive gas atmospheres Part 2: intrinsically safe “ ib”
Gb3836
9-2006 electrical equipment for explosive gas atmospheres Part 9: encapsulated type “ m”
Gb3836
15-2000 electrical equipment for explosive gas atmospheres Part 15: electrical installations in hazardous locations (excluding coal mines)
Jb/10538-2005 explosion proof dehumidifiers and air conditioners
  Product features:
  ★ explosion proof fan coil unit relies on advanced technical standards and production process; It has the characteristics of high efficiency, energy saving, health and environmental protection, quiet operation, flexible installation, beautiful appearance, etc
, and has a variety of forms to choose from
With its rigorous professional design, exquisite manufacturing experience and excellent product performance, it has been adopted by various industries

  ★ complete specifications; In order to meet the needs of customers in various occasions, BFP explosion-proof fan coil provides three types of external static pressure, 12Pa, 30 PA and 50 PA, and lengthens the water pan and the rear / lower return air box

  ★ lightweight appearance: the unit is light and beautiful as a whole, with compact and solid structure
The surface of the exposed coil is sprayed with high-quality plate of Shanghai Baosteel, and the concealed coil is made of zinc plate or fingerprint resistant plate

  ★ high efficiency and energy saving: the heat exchanger of the unit adopts high-quality air-conditioning thin-wall copper tubes, equipped with high-efficiency sine wave window type LV warping sheets, precision hydraulic and mechanical expansion tubes, with high heat exchange efficiency

  ★ low energy consumption: the selected fan and motor are reasonably and accurately matched to ensure that the unit reaches the maximum refrigerating capacity per unit power during operation
The fan impeller and motor are directly driven, and both static and dynamic balance are carried out

  ★ low noise: the impeller, volute and low-noise motor selected by the unit, together with the use of high-efficiency sound-absorbing insulation cotton, can minimize the noise of the unit on the basis of ensuring the air volume and air outlet static pressure

  ★ the structural design is flexible and advanced: the position of the base fan and the air outlet flange can be easily changed, and the user can easily change the direction of the connecting pipe on site, saving time and effort in installation

  ★ safety and leak proof: the condensate pan and flame-retardant insulation material of the unit are formed by stamping at one time, without welds and welding spots, so as to prevent dripping and water leakage; The specially designed water pan mold is formed at one time, and the bottom surface is pressed with an inclined groove to ensure the rapid discharge of condensate

 
The company has a variety of products, which can be customized without standard!