Yixing explosion-proof fan coil, Yingpeng explosion-proof fan coil

  Brand: Yingpeng series: vertical concealed explosion-proof fan coil
Model: bfp-51 (1P)
Air volume speed (high, medium and low m³ /h): 500/400/300
Cooling capacity (high, medium and low W): 2800/1380/1930
Heating capacity (high, middle and low W): 4200/3570/2940
Water volume (kg/h): 480
Water resistance (kPa): 19
Type: explosion proof single-phase capacitor operated asynchronous motor
Power supply: 220v/50hz
Fin type: bidirectional slotted aluminum fin
Working pressure: ≤ 1
6mpa
Input power (W):44
Used room area (m²): fourteen
Parameter table of vertical concealed explosion-proof fan coil:
 
Introduction to vertical concealed explosion-proof fan coil:
It is an ideal end product of central air conditioning, widely used in laboratories, storage, chemical industry, medicine, textile, printing and dyeing, paint rooms, nuclear power plants, substations, military and military facilities and other explosive hazardous environments; To meet the design and selection of different occasions in explosive environment

The types of fan coil units include: horizontal concealed fan coil units (with bellows), horizontal concealed fan coil units (without bellows), horizontal surface mounted fan coil units, vertical concealed fan coil units, vertical surface mounted fan coil units, card type two outlet fan coil units, card type four outlet fan coil units and wall mounted fan coil units

Explosion proof fan coil unit is mainly composed of explosion-proof low-noise motor, explosion-proof junction box, coil, etc
The explosion-proof fan sends the indoor air or outdoor mixed air into the room after cooling or heating through the surface cooler to reduce or increase the indoor temperature, so as to meet the temperature regulation requirements of equipment and personnel in explosive environment
The cooling (heating) medium water in the coil is centrally supplied by the machine room

Product features:
★ the fan coil unit body is exquisite, compact, durable and beautiful

★ the fan coil unit is made of high-quality casing and molded into a whole by molding process
There are no welds and welding spots
The insulation materials that meet the fire protection specifications are connected to the water pan as a whole

★ small volume of fan coil: the body is designed to be light and light
The drainage pipe and line are easy to install, and the left and right connecting pipes and air return modes can be changed at any time to match the site conditions
The unit can be installed in any space

★ high fan coil efficiency: the advanced tube expansion process ensures the close contact between the copper tube and aluminum foil of the heat exchanger, with good heat transfer performance;
★ low noise of fan coil: reasonable fan and air flow structure design and high-quality sound-absorbing and thermal insulation materials make the unit noise 1-3dB (a) lower than the national standard;
★ low energy consumption of fan coil unit: the fan is reasonably matched with the heat exchanger, and the air volume can be adjusted in three grades, so as to save the fan power

★ there are two types of fan coil: vertical and horizontal; The installation mode is open installation and concealed installation; According to the air outlet mode, it can be divided into top air outlet, inclined air outlet and front air outlet; According to the water inlet mode, it can be divided into left water inlet, right water inlet and rear water inlet

The discrimination method is: look down at the fan coil unit facing the upward air outlet as the benchmark
The fan coil unit for inclined air outlet and front air outlet shall be based on facing the air outlet
The water inlet and outlet pipes are called left inlet on the left, right inlet on the right, and rear inlet on the rear

The Executive Standards of this series of products are as follows:
Gb3836
1-2000 electrical equipment for explosive gas atmospheres Part 1: General requirements
Gb3836
2 -2000 electrical equipment for explosive gas atmospheres Part 2: flameproof type “ d”
Gb3836
4 -2000 electrical equipment for explosive gas atmospheres Part 2: intrinsically safe “ ib”
Gb3836
9-2006 electrical equipment for explosive gas atmospheres Part 9: encapsulated type “ m”
Gb3836
15-2000 electrical equipment for explosive gas atmospheres Part 15: electrical installations in hazardous locations (excluding coal mines)
Jb/10538-2005 explosion proof dehumidifiers and air conditioners