Medtronic FICON LifePak CR plus automatic external defibrillato

  Technical parameters of Medtronic FICON LifePak CR plus automatic external defibrillator:
Waveform: bidirectional truncated exponential wave
The duration of voltage and current can be compensated according to the patient's impedance

Output energy: from 200J to 360j, users can set it by themselves (up to 150j at least outside the United States);
Minimum start-up time: 20 discharges or 140 minutes of start-up time can be carried out from the slow instrument
Charging time: use the fully charged instrument: charge to 200 joules for less than 9 seconds, and charge to 360 joules for less than 15 seconds
System recharging time: recharge the fully discharged instrument: use a new charging rod at a temperature higher than 15 ℃
After 48 hours of charging, it can carry out 6 electric shocks or 42 minutes of operation
After 14 days of charging, it can carry out 20 electric shocks or 140 minutes of operation

LifePak CR plus is light and firm
It follows our original adaptive bidirectional wave technology of adaptiv and provides two configurations of semi-automatic or full-automatic defibrillation

Medtronic FICON LifePak CR plus defibrillator will give a life-saving defibrillation shock,
When you judge that the patient is not breathing and unconscious,
All you need to do is:
Press the button to open the defibrillator cover and turn on the defibrillator at the same time

Pull down the handle to tear off the packaging of the electrode sheet, take out the electrode sheet and stick it to the patient's chest as shown in the figure

If the red defibrillator flashes and there is a voice prompt to press the defibrillation key for defibrillation, please press the defibrillation key
Physical properties:
Height: 10
7 cm
Width: 20
3 cm
Depth: 24
1 cm, excluding handle
Weight: 2
0kg
Environmental parameters:
All defined performance parameters are assumed to be stored in the operating temperature environment (at least 2 hours) before operation
Operating temperature: 0 to 50 ° C
Storage temperature: - 40 to 70 ℃, with charging rod and electrode piece, and the maximum exposure time shall not exceed one week

Atmospheric pressure: 760 to 429 mmHg, altitude 0-15000 feet
Relative humidity: 5 & mdash; 95% (non condensing)
Waterproof performance: IEC60529 / en60529 IPx4 & ldquo; Splash proof & rdquo; In the test, the electrode pieces are connected,
Charging rod mounted impact: in accordance with mil-std-810e, method 514
4, procedure 1
Vibration: meet mil-std-810e, method 514
4, helicopter class 6 standard and surface vehicle class 8 standard