Installation method of Shanxi 80L mining plastic water tank gs80 flameproof water tank

  Installation method of Shanxi 80L mining plastic water tank gs80 flameproof water tank
Gs80 flameproof water tank, mining plastic water tank, flameproof water tank manufacturer, 80L flameproof water tank, flameproof water tank installation mode
The mine flameproof water tank shall always keep the water tank intact and the specified water volume, and the upper edge shall be horizontal to meet the design requirements
The models of Unocal flameproof water tank include GS40, GS60 and gs80, which is convenient for installation

1、 Location of gs80 flameproof water tank:
1
The main locations for setting explosion shelters are:
a
The main transportation roadway and return air roadway connected between the two wing shafts of the mine;
b
Return air roadway of centralized transportation roadway between two adjacent mining areas;
c
Transportation crosscut and return crosscut between adjacent coal seams;
2
The location of auxiliary explosion proof shed is:
a
Air inlet and return roadway of medium mining face
b
Coal and semi coal rock excavation roadway in mining area
c
Other roadways with independent ventilation and medium dust explosion risk;
2、 Gs80 flameproof water tank structure:
Ys water tank, rectangular trapezoid, one-time forming, smooth surface
3、 Installation method of gs80 flameproof water tank:
1
Installation mode of sink shed: hanging type, upper supporting type or mixed type can be adopted; The principle is: when subjected to explosion * impact, water is easy to spill; The arrangement shall comply with the following provisions:
Nb / L & times when section s ＜ 10m2; 100＞ =35%
Nb / L & times when section s ＜ 10m2; 100＞ =50%
Nb / L & times when section s ＜ 10m2; 100＞ =65%
Where n - the number of flumes on the drainage shed, B - the width of the windward section of the water shed, and L - the width of the horizontal roadway where the water shed is located;
2
The sum of the gap between the flume and the gap between the flume and the support or roadway wall shall not be greater than 1
5m, no more than 1
8m, the gap between the two flumes shall not be greater than 1
2m, the distance between the edge of the flume and the roadway wall, support, roof and structure shall not be less than 0
1M, and the distance from the bottom of the flume to the top beam shall not be greater than 1
6m
If it is greater than 1
6m, one shall be added above the flume;
3
The distance between the water shed and the roadway rail surface shall not be less than 1
8m, and the uniform height shall be maintained
When roof lifting is required, the roadway section in the water shed area shall be consistent with the roadway section 20m in front and behind;
4
Hang the water tank, the hook position shall be aligned, arranged opposite to each other, and the hook shall be arranged 4 & mdash; 8mm Round Steel with hook angle of 60 & plusmn; 5 degrees, variable hook 25mm

  Shandong Unocal Mining Technology Co
, Ltd
produces mine flameproof water tanks with specifications of 40L, 60L and 80L
The products have flame retardant performance, convenient installation and wide application
Please call for details

Contact: Manager Zhang ,
Mobile: 18660826952 (same as wechat)
QQ：2890974168