How to enhance the compatibility of nylon and glass fiber paint

  At present, nylon plus glass fiber material painting is more and more widely used in production and manufacturing, because nylon plus glass fiber material has the comprehensive properties of non-toxic, light weight, excellent mechanical properties and excellent wear resistance It is understood that painting on the surface of materials treated by electroplating process is a more effective method, but electroplating surface treatment should also be operated according to appropriate materials, because it is not suitable for electroplating process materials, and the production result is a waste of materials, which can not bring help
Common plastic materials that can be used for electroplating include ABS, TPU, PC and other materials
There is also a kind of nylon plus glass fiber material for vacuum electroplating
Some producers may think that the vacuum electroplating effect test of nylon material fails, but the paint coating or vacuum electroplating on the surface of nylon plus glass fiber material has a good effect
According to the experiment, it is proved that the surface treatment quality of the electroplated nylon and glass fiber workpiece can achieve the expected effect by vacuum electroplating test The electroplating process painting is mainly to improve the surface quality of the material
The basic nylon plus glass fiber vacuum electroplating is mainly to spray UV paint, because UV paint can enhance the hardness of the material, improve the gloss, and protect the environment
In the painting operation of electroplating process, the common problem is the problem of adhesion
Poor adhesion is mainly divided into two reasons: 1 Poor surface cleaning: 2 The substrate and paint are not compatible with each other
Due to the low polarity of nylon, it is difficult to adhere, the hardness of UV paint is high, and the adhesion effect is general
Therefore, it is difficult to solve the adhesion of nylon and glass fiber sprayed with UV paint for vacuum electroplating The more effective way to solve the adhesion of vacuum electroplating by spraying UV on nylon and glass fiber is to use Jisheng nylon treatment agent, which is a targeted auxiliary developed according to the poor painting of nylon and glass fiber materials
Only when the adhesion of primer is solved can the vacuum electrodeposited coating and finish coat not fall off
The operation is also relatively simple
Before spraying the treatment agent, the surface of the material shall be effectively cleaned, and then the nylon treatment agent shall be sprayed on the substrate and wet
After the nylon treatment agent is dry, the UV paint shall be sprayed
The adhesion can reach 5B
Solving the problem of adhesion in the early stage is a good foundation for manufacturing, and there will be no problem of poor adhesion in the later process