High efficiency air filter liquid tank glue blue liquid tank glue

  Purpose of filter liquid tank glue: , Two component colorless, transparent liquid aliasing filter tank glue, evenly mixed in proportion, can be vulcanized into gel elastomer at a certain temperature
Mainly used for air filter sealing
(usually blue)
 
Characteristics of filter liquid tank glue:
  The vulcanized rubber has low viscosity, low molecular weight release, low shrinkage and no corrosion
The cured gel has self adhesive and self healing property
It has moisture-proof, aging resistance, mechanical shock and vibration resistance, and can be used in - 50 & mdash; Long term use at 200 ℃ and stable performance
It is mainly used for the sealing of liquid tank type high-efficiency air filter, electronic appliances and components, and plays the role of sealing, moisture-proof, shockproof, insulation and other protection
This product has good adhesion with aluminum, galvanized sheet, stainless steel, etc

 
Filter liquid tank glue operation:
①　  Before mixing, first fully stir component A and component B in their respective containers

②　  When mixing, observe component A: Component B ,= 1: 1 weight ratio

③　  When in use, it can be defoaming as needed
Mix the mixture of a and B evenly, put it into a vacuum container, defoaming at 0
08mpa for 5 minutes, and then pour it for use

First, the components are encapsulated by alcohol to remove the oil and impurities
After the solvent is evaporated, the mixture of A and B can be evenly mixed in the ratio of 1:1 to fill the glue
The conditionally can be encapsulated by vacuum and then be vulcanized into gel elastomers at 3-8 hours at room temperature
The detection needs to be placed for more than 24 hours

 
Precautions for filter liquid tank glue:
a
  When operating the liquid tank glue of the filter, glue a and glue B must be mixed in strict accordance with 1:1;
b
  Do not smoke when operating the liquid tank glue of the filter to prevent silica gel & ldquo; In Du & rdquo;, The surface is not dry;
c
  Do not contact with any other condensed silica gel, otherwise it will cause Du in the curing agent (b glue), resulting in the phenomenon that the silica gel will not cure
Water, impurities, organotin catalyst, acid, alkali and other organic substances containing sulfur, phosphorus and nitrogen can affect the curing of the adhesive
These substances cannot be mixed or contacted during use

 
 
Package specification:
This product is packed in iron drums with specifications of 25kg and 200kg
Users who buy products for the first time can enjoy sample packaging

 
Storage and transportation:
The liquid tank glue of the filter shall be stored in room temperature, dry bath and sealed container
Do not contact with water to prevent deterioration

This product is transported without *