Liquid tank sealant high efficiency filter liquid tank glue jelly

Purpose of liquid tank sealant:
  Two component colorless transparent liquid aliasing liquid groove sealant (also has a blue jelly glue), according to A:B evenly mixed in 1:1 ratio, at a certain temperature can be turned into gel elastomer
Mainly used for air filter sealing

 
Features of liquid tank sealant:
The viscosity of the jelly glue of the high efficiency filter tank is low, and the viscosity of the former is low, and no low molecular weight is released when it is changed
The linear shrinkage rate is small and no corrosion
It has moisture-proof, aging resistance, mechanical shock and vibration resistance, and can be used in - 50 & mdash; Long term use at 200 ℃ and stable performance
It is mainly used for the sealing of liquid tank type high-efficiency air filter, electronic appliances and components, and plays the role of sealing, moisture-proof, shockproof, insulation and other protection
This product has good adhesion with aluminum, galvanized sheet, stainless steel, etc

 
Operation of liquid tank sealant:
①　  Before mixing, first fully stir component A and component B in their respective containers

②　  When mixing, observe component A: Component B ,= 1: 1 weight ratio

③　  When in use, it can be defoaming as needed
Mix the mixture of a and B evenly, put it into a vacuum container, defoaming at 0
08mpa for 5 minutes, and then pour it for use

First, alcohol is used to wash the components to be sealed, so as to remove oil and impurities
After the solvent is evaporated, the mixture of A and B can be evenly mixed according to the ratio of 1:1 to fill the glue
The conditionally can be encapsulated by vacuum and then be converted into gel elastomer at 3-8 hours at room temperature, and the detection needs to be placed for more than 24 hours

 
Precautions for liquid tank sealant:
a
  Operate the liquid tank sealant
Glue a and B must be mixed in strict accordance with 1:1;
b
  Do not smoke during the operation of liquid tank sealant to prevent silica gel & ldquo; In Du & rdquo;, The surface is not dry;
c
  Do not contact with any other condensed silica gel, otherwise it will cause Du in the curing agent (b glue), resulting in the phenomenon that the silica gel will not cure
Water, impurities, organotin catalyst, acid, alkali and other organic substances containing sulfur, phosphorus and nitrogen can affect the curing of the adhesive
These substances cannot be mixed or contacted during use

d
  In order to achieve better use effect of your mold, please store the mold for at least 24 hours before use

e
  The two components of this series of products should be sealed and stored in a cool place to avoid sun and rain

f
  This series of products are non *; However, in the process of use, if the curing agent is in contact with the skin, it can be cleaned with an appropriate amount of detergent and water; If the curing agent splashes into the eyes, immediately wash with clean water for at least 15 minutes and consult a doctor

 
quality guarantee period:
The finished silica gel mold can be placed for half a year without opening the package at room temperature of 25C for 12 months

 
Package specification:
This product is packed in iron drums
There are two specifications: 25kg and 200kg
All users who * buy products can enjoy sample packaging

 
Storage and transportation:
Liquid tank sealant shall be stored in room temperature, dry bath and sealed container
Do not contact with water to prevent deterioration

This product is transported without *