Fe100rl magnetic seat drill with strong power supply and stepless speed regulation

  Brief introduction to fe100r / L: , Fe100r / L magnetic seat drill can tap, stepless speed change, torque protection, and can use the adsorption force of magnetic seat to drill from various angles
When used with coring bit, the effect is better; At the same time, it also solves the problem of removing waste residue from the pipeline
Satisfactory results can be obtained for overlapping drilling of steel plates
The problem of drilling stainless steel pipes and stainless steel with a certain thickness can also be solved
Technical parameters: coring drilling: & phi; 12-100mm borehole SD: 110mm travel: 250mm twist drilling: φ 1-32mm countersunk head drilling: & phi; 1o-50mm hinge , Hole: ,& phi; 32mm tapping , Teeth: M6-m36 transition sleeve: Morse 3 taper handle electric voltage: 230V power rate: 1800W attached function: Overtemperature and overtorque protection, overcurrent protection and stepless speed regulation gear I speed: 40-140min-1 gear II speed: 12-480min-1 magnetic base size: 110mm× 220mm× 54mm net weight: 27kg suction: 32000 Newton two accessory thimbles Three hexagon socket cutters and one disassembly flat knife Toolbox one user manual one If you are drilling stainless steel, soldering material, manganese steel and other materials with high hardness and high viscosity, please be sure to choose fe100r / LS machine
Fe100r / LS has stepless speed change, torque protection and dual insulation protection device
When fe100r / LS is loaded, * slow speed of 40 rpm, torque can be large or small
For hard drilling materials and high viscosity plates, torque can be adjusted to large and speed can be adjusted to low, As we all know, the lower the speed, the greater the torque, and the higher the speed, the smaller the torque
Fe100r / LS is equipped with overload protection device
If the machine is overloaded due to manual operation, the machine will stop automatically to effectively protect the motor from burning out, making your drilling easier
The tapping function can tap the inner thread of m4-m36, and the magnetic seat can rotate 120 degrees
It is a multifunctional magnetic seat drill with the integration of hollow drill, twist drill and tapping After sales service: supply cycle: a large number of goods are in stock in Shanghai warehouse, and the goods can be delivered on the day of full payment
Mode of transportation: any express that can reach you can be transported free of charge, such as Shunfeng, China Railway Express, EMS, Shentong, Huitong, etc
Warranty period: the magnetic drill is guaranteed for one year (excluding human factors)
Warranty method: if the customer confirms which part of the parts are broken, we will send the free original parts to the customer on the same day
After the customer receives and installs them, we will send the old parts back to our company
Our common accessories are available in stock
(if the machine is operated correctly, there will generally be no problem with the machine
) Precautions for use: 1
The machine quotation does not include the drill bit
The drill bit is provided by the customer or can be purchased
2
Note to users who use the generator for power supply: the power plug must be unplugged during shutdown
The voltage shall not exceed 240V
3
When drilling, the machine coolant must be used at the same time: you can buy saponification liquid in the hardware market and mix it with water in proportion
You can't use water for cooling! Otherwise, the machine is easy to be damaged and the drill bit cannot be taken out
4
Water cannot enter the machine body, or the circuit board will be burned! 5
Please note that barbaric operation is prohibited
If you press down too fast, it will damage the drill bit and the machine; Do not use coolant, and do not knock hard when the drill bit cannot be taken out; If the scrap iron is not cleaned in time, it will cause too much scrap iron to wrap around the drill bit
It is possible that the scrap iron will jump into the machine and burn the circuit board Our company can provide free technical guidance
With the same environment and the same drill bit, we can compare the drilling speed and hole finish
Who can solve the drilling problem more effectively
Imported from Germany, guaranteed