European component mould silica gel GRC mould silica gel EPS line mould silica gel

  Usage of mold silica gel: mold silica gel is used for resin crafts, automobile tire molds, gypsum crafts, crystal, candle, soap crafts, large-scale sculpture, architectural decoration (cornice, cultural stone, European component mold silica gel, railing, European carving, square landmark sculpture, etc
), relief furniture, plastic toys, gifts, stationery, imitation marble, Silicone mold manufacturing in many industries such as human statue

Note: many industries are indispensable for the use of fast replication products

 
Features of European component mould silica gel:
1)  It has good operation performance, and the performance can be adjusted according to the customer's operation process (brushing and pouring)

2)  European component mould silica gel has good fluidity, low viscosity and easy bubble discharge

3)  The shrinkage rate is small, and the condensed silica gel can achieve two thousandths

4)  Strong tear resistance and tensile properties

5)  There is no problem with high temperature resistance at 200 degrees
The silicone of European component mould at minus - 50 degrees is still not brittle and still very soft
The simulation effect is very good

6)  More mold turnover times, long service life, acid and alkali resistance and aging resistance

 
European component mould silica gel operation:
There are three ways to open silica gel mold: wrap mold (pouring mold) and rinse mold (chip mold)
The silica gel of European component mould is a flowing liquid, which is divided into two groups: group A is silica gel and B is curing agent
For example, 100g silica gel is added with 2% curing agent and stirred evenly
The following operations can be carried out:
Mold opening methods include wrap mold, brush mold (slice mold, three-dimensional mold, plane mold) and pouring mold
Brush mold (chip mold): generally, the brush is three-layer
According to the requirements of the mold, the surface brush is vacuumized on the mold seed and brushed in place* The third layer is coated with silica gel, which is solidified and formed

 
Precautions for European component mould silica gel:
a
  The dosage of curing agent shall depend on the temperature, and it will decrease when the temperature is high
If the curing agent is used too much, the mold will become hard and brittle; If the curing agent is used too little, the operation time will be prolonged

b
  In order to prevent the change of silica gel physical properties of European component mould, it is recommended not to add silicone oil

c
  In order to achieve better use effect of your mold, please store the mold for at least 24 hours before use

 
quality guarantee period:
The finished silica gel mold can be placed for half a year without opening the package at room temperature of 25C for 12 months

 
Package specification:
This product is packed in iron drums with specifications of 25kg and 200kg
Users who buy products for the first time can enjoy sample packaging

 
Storage and transportation:
The silica gel of European component mould shall be stored in room temperature, dry bath and sealed container
Do not contact with water to prevent deterioration

This product is transported without *

 
After sales service and technical support: (in case of purchasing European component mould silica gel)
1)  We will provide you with high-quality products of international standards and competitive prices

2)  We will recommend you suitable and high-quality products to meet your actual needs

3)  Free product application demonstration and operation skill training for customers

4)  Solve the operation technical problems for customers free of charge

5)  Provide mold opening technology and use technology free of charge