Environment friendly coke drum machine

  Environment friendly coke drum machine , The coke drum machine is developed and produced according to the requirements of GB / T2006
The inner diameter of the drum is 1000mm and the inner length of the drum is 1000mm
At a constant speed of 25 revolutions per minute and 100 revolutions in 4 minutes
The drum is an environment-friendly drum, which is completely closed on the basis of the original drum, and equipped with a dust removal interface, which can be connected with the external dust removal pipe to remove a large amount of dust generated during the rotation and unloading of the drum
There is a receiving trolley, which can be pushed under the drum first, close the door, and after the drum is rotated, the tested coke sample can be directly poured into the trolley and pushed out of the drum, It can greatly improve the operating environment of employees and reduce noise pollution
It is the equipment of coking plants and iron and steel plants
Intelligent dust removal system for sample preparation room
The intelligent dust removal system in the sample preparation room is to comprehensively purify the dust in the sample preparation room of coal, coke, iron ore and other mineral products, so as to make it meet the requirements of relevant emission standards

main features
1
The dust removal system is mainly composed of dust collector, pipeline, control valve, exhaust hood, dust removal workbench, control system and auxiliary devices

2
Dust collector: a ventilation component set in the place of harmful substances to capture and control harmful substances
3
Dust source control system: organic combination of equipment dust removal and space dust removal, multiple dust filtration treatment, obvious dust removal effect, and the emission concentration is lower than the standard requirements

4
Intelligent control system: automatic and manual control; Large LCD touch screen; Siemens PLC frequency conversion control can monitor the pressure difference inside and outside the chamber of each equipment in real time, and accurately control the air volume, wind speed and air pressure, so that the dust removal system is always in a good state of dust removal effect

5
Dust removal workbench: used for manual shrinkage, sample loading and other operations, and linked to the dust removal system workbench

Main technical parameters
Dust removal method: centralized dust removal by dust collector ,
Treatment air volume: 3200-10000m3 / H ,
Host power: 4-15kw
Discharge concentration: 5mg / m3
Air path control: electric air valve
Power supply voltage: three phase 380V
Pipe layout: corner or trench or top
Dust collection type: direct connection equipment or suction hood