Hammer crusher (wet sanding machine) 300*500

Hammer sander
  Hammer sander (crusher) is one of the mineral processing equipment for crushing ore
It can crush the ore below 50mm or tailings and middlings in incompletely separated minerals, separate useful metals from the ore, crush the ore particles to about 1~180 mesh according to the requirements of the concentrator, and then enter the shaking table for separation
It is suitable for small-scale mines and can replace ball mills to a certain extent
Easy installation, easy operation, less investment and quick effect
In the actual crushed ore, screens of different specifications can be selected, and the minimum screen hole is 2mm

  Detailed introduction
The hammer type sanding machine can crush the ore below 50mm or the tailings and middlings in the incompletely separated minerals, separate the useful metals from the ore, crush the ore particles to about 1~180 mesh according to the requirements of the concentrator, and then enter the shaking table for separation
It is suitable for small-scale mines and can replace ball mills to a certain extent
Easy installation, easy operation, less investment and quick effect
The main working part of hammer crusher is the rotor with hammer (also known as hammer head)
The rotor is composed of a main shaft, a disc, a pin shaft and a hammer
The motor drives the rotor to rotate at high speed in the crushing chamber
The materials are fed into the machine from the upper feeding port and are crushed by the impact, impact, shear and grinding of the high-speed hammer
At the lower part of the rotor, there is a screen plate
The particle size smaller than the size of the screen hole in the crushed material is discharged through the screen plate
The coarse particle size larger than the size of the screen hole is prevented from remaining on the screen plate to continue to be hit and ground by the hammer, and finally discharged out of the machine through the screen plate