The
<<<<<<<<<<<<<<<<<<<<<< <
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<| | << | <<<<<<<<<<
<<<<
| resistance loss: | 1200 (PA) |
liquid gas ratio: | 1 | | outlet dust concentration: | 0
03 (g / Nm3) |
| service temperature range: | 300 (℃) |
| treatment air volume: | 5000 (m3 / h) |
| filtration speed: | 1
2 (M / min) |
| specification: | dmc-48 |
I
product introduction DMC pulse jet single machine bag filter is a small bag filter designed by our factory after digesting and absorbing the advanced technology of similar foreign products
The dust collector adopts the technology of high-pressure (0
5 ~ 0
7MPa) and large flow pulse valve to spray ash one by one filter bag
Compared with other domestic single machines, it has the characteristics of large ash cleaning kinetic energy and high ash cleaning efficiency
It has the advantages of small volume, light weight, simple and compact structure, easy installation and convenient maintenance (external filtration)
It is widely used in dust containing gas purification and treatment system in building materials, metallurgy, mining, chemical industry, coal, non-metallic ore ultra-fine powder processing and other industries
It is an ideal equipment for environmental protection and dust removal
There are six specifications for this series of dust collectors temporarily, and each specification can be divided into standard type A with ash bucket and open flange type (without ash bucket) B
The structure is mainly composed of a filter chamber, a filter bag, a clean gas chamber, a ash hopper, a ash discharge valve, a pulse injection device, an electric control box, etc
all the box bodies adopt a welding structure, and the maintenance door is sealed with foam rubber strips to ensure that the dust collector is tight and air tight
2、 Type selection of dust collector: the single machine has six specifications of 32, 48, 64, 80, 96 and 112, and is divided into two installation forms to meet the use requirements of different occasions
The specific model description is as follows: dmc-32 (AB) d & mdash& mdash; Single machine dust collector MC & mdash& mdash; Pulse jet -32 & mdash& mdash; Number of filter bags 32 (AB) & mdash& mdash; A: With ash hopper and ash unloading valve B: flange type III
working principle: dusty gas enters the ash hopper from the air inlet, enters the filter bag chamber through the open flange port, the dusty gas is filtered into clean gas through the filter bag, enters the clean gas chamber, and then passes through the exhaust port of the clean gas chamber and is discharged by the fan
The dust accumulated on the outer surface of the filter bag and increased continuously, which increased the resistance of the bag dust collector
In order to make the equipment resistance no more than 1200pa, the bag dust collector can work intermittently, and the dust on the filter bag needs to be removed regularly
For ash cleaning, the program controller starts the artery flushing valve regularly and sequentially, so that the compressed air (0
5 ~ 0
7MPa) in the bag is ejected from the orifice of the spray pipe (called primary air) and induces the surrounding air (called secondary air) several times higher than the primary air through the venturi to enter the filter bag, so that the filter bag expands rapidly in an instant, shakes off the dust with the reverse direction of the air flow, and the dust attached to the bag surface quickly leaves the filter bag and falls into the ash hopper (or ash bin), the dust is discharged by the ash unloading valve to achieve the purpose of ash removal
IV
technical parameters
|
performance and model
| DMC-32
| DMC-48
| DMC-64
| DMC-80
| DMC-96
| DMC-112
|
total filtering area (M2)
| 24
| 36
| 48
| 60
| 72
| 84
|
filter wind speed (M / min)
| 1
04～1
67
| 1
15～1
62
| 1
21～1
74
| 1
25～1
67
| 1
27～1
62
| 1
28～1
68
|
treatment air volume (m3 / h)
| 1500～2400
| 2500～3500
| 3500～5000
| 4500～6000
| 5500～7000
| 6500～8500
|
number of filter bags (PCs
)
| 32
| 48
| 64
| 80
| 96
| 112
|
gas consumption (m3 / min)
| 0
032
| 0
048
|
Contacts
- Company Name
- Botou jodar dust removal equipment Co., Ltd
- Name:
- Mr. Shi Xiaojing
- Telephone
- 13111757575
- Mobile
- 13111757575
Address
- Operational Address
- Not filled in
Find Similar Products By Category
premiumexporter.com温馨提示
本网页所展示的有关【Dmc-64 pulse dust collector Botou jodar 2T electric furnace single pulse bag dust collecto】的信息/图片/参数等由的会员【Botou jodar dust removal equipment Co., Ltd】提供，由premiumexporter.com会员【Botou jodar dust removal equipment Co., Ltd
】自行对信息/图片/参数等的真实性、准确性和合法性负责，本平台（本网站）仅提供展示服务，请谨慎交易，因交易而产生的法律关系及法律纠纷由您自行协商解决，本平台（本网站）对此不承担任何责任。您在本网页可以浏览【Dmc-64 pulse dust collector Botou jodar 2T electric furnace single pulse bag dust collecto】有关的信息/图片/价格等及提供【Dmc-64 pulse dust collector Botou jodar 2T electric furnace single pulse bag dust collecto】的商家公司简介、联系方式等信息。
在您的合法权益受到侵害时，请您致电，我们将竭诚为您服务，感谢您对premiumexporter.com的关注与支持！
|
view details
view details
view details
view details
view details
view details
view details
view details
view details
view details
view details
view details
view details