Boiler desulfurization and dust collector desulfurization and denitration dust removal equipment des

The flue gas passes through the flue system from the existing electrostatic precipitator and blower; It flows through an axial flow booster fan and enters the desulfurization tower
After entering the desulfurization tower, the flue gas contacts with the countercurrent jet slurry containing ammonia slurry, in which SO2 is absorbed by ammonia slurry
At the same time, the slurry saturates the gas and cools it from 135 ÷ degree at the inlet to 50 ℃, and then the gas passes through two corrugated demisters on the top of the desulfurization tower
Two layers of efficient demisters are installed on the upper part of the desulfurization tower to remove the attached droplets (in the flue gas)
The gas in the spray tower is removed from the desulfurization tower and passed through the boiler again to reheat the gas and enter the existing chimney device at 80 degree temperature and according to the designed operating conditions