Cyclone dust collector cyclone separator double row large cylindrical dust collector shakron

  Correct use of cyclone dust collector The wind type dust collector relies on the rapid rotation of dusty gas in the dust collector and centrifugal force to promote the separation of particulate dust and gas
Therefore, its structure and principle are very different from other mechanical dust collectors, and the operation, maintenance and management are also particularly important
The operation of cyclone dust collector includes startup, operation and shutdown
The maintenance work is mainly the analysis, troubleshooting and prevention of common faults Operation and maintenance management of particle dust cyclone 1
Correct operation of cyclone 1
1 preparations before startup 1) Check whether all connecting parts are firmly connected 2) Check the air tightness of dust collector and flue, dust collector and ash hopper, ash hopper and ash discharge device, ash conveying device and other joint parts to eliminate ash and air leakage 3) Turn down the baffle valve, start the fan, and gradually open the baffle valve after there is no abnormality, so that the dust collector can pass through the specified amount of dusty gas and body 1
2 technical requirements during operation 1) Pay attention to the changes of easily worn parts, such as the inner wall of the outer cylinder 2) Pay attention to dust adhesion, blockage and corrosion when the temperature of dusty gas changes or humidity decreases
3) Pay attention to the change of differential pressure and the discharged smoke color
Because wear and corrosion will make the dust collector perforated and lead to dust emission, the dust removal efficiency will decline, the exhaust smoke color will deteriorate, and the differential pressure will change 4) Pay attention to the air tightness of all parts of the dust collector, and check the changes of gas flow and dust concentration of the cyclone 1
3 technical work after operation 1) In order to prevent the adhesion and corrosion of dust, let the dust collector continue to operate for a period of time after the dust removal operation, and stop the operation of the dust collector until the dust collector is completely replaced by clean air 2) Eliminate the dust attached to the inner cylinder, outer cylinder and blade, and remove the dust in the ash hopper 3) Repair perforation caused by wear and corrosion as necessary