Waste incinerator electrostatic precipitator precipitator tube bundle electric tar precipitator manu

The tar electric tar precipitator is composed of shell, precipitation electrode, corona electrode, upper and lower hangers, gas redistribution plate, purging pipe, insulation box and feed box
The main differences are the form of precipitation electrode, arrangement mode of corona electrode, insulation box and feed box
The honeycomb electric tar precipitator is composed of hexagonal honeycomb tubes with channel cut-off anchors
Two adjacent regular hexagons share one edge, that is, the six edges of the regular hexagon in the middle are shared by the six regular hexagons surrounding it
The honeycomb plate made of 2
5 ~ 3mm steel plate can meet the requirements of process and mechanical strength
As the honeycomb electric tar precipitator has the advantages of compact and reasonable structure, no electric field holes, high effective space utilization, light weight, less steel consumption and good capture characteristics, with the improvement of equipment manufacturing technology, the advantages of honeycomb electric tar precipitator will be paid more and more attention, and will gradually replace concentric and tubular electric tar precipitators A multi-stage gas distributor is set at the gas inlet to remove part of the tar by mechanical method, reduce the gas flow rate and make the gas distribution more uniform, so as to improve the efficiency of the electric tar precipitator The adjustable corona wire hanger structure is adopted to ensure that each corona wire is in the center of the honeycomb pipe, and the error is controlled within 2mm and falls into the ash hopper
Regularly open the valve under the ash hopper to discharge the ash into the slag box and transport it away
The purified flue gas is sent to the chimney through the smoke exhaust fan and finally discharged into the atmosphere