Custom processing stainless steel dust collector industrial pulse bag dust collector Cangzhou field manufacture

  Stainless steel bag filter_ Details Application and selection of stainless steel bag filter
Stainless steel bag filter is also a kind of bag filter, but the material is different from ordinary iron bag filter
The air volume of the stainless steel bag dust collector shall be the same as that of the ordinary bag dust collector, and the manufacturer shall choose the appropriate air speed
The special purpose of stainless steel bag filter is mainly determined according to the performance of stainless steel plate

1、 Some dusty gases are corrosive and_ The plate with corrosion resistance shall be selected as the dust collector
Ordinary iron dust collector has no corrosion resistance, so only stainless steel dust collector can be selected

2、 The oxidation resistance of stainless steel bag dust collector can prolong the service life of the dust collector
The cost of stainless steel bag dust collector is higher than that of ordinary dust collector, but the stainless steel dust collector should be more beautiful and durable
When selecting the dust collector, manufacturers should make corresponding choices in combination with their own specific conditions

The working principle of stainless steel bag filter is
The dusty gas enters the ash hopper from the air inlet or enters the filter bag chamber through the open flange port
The dusty gas is filtered into purified gas through the filter bag of the dust collector, enters the gas purification chamber, and then passes through the exhaust port of the gas purification chamber and is discharged by the fan
The dust accumulates on the outer surface of the filter bag and increases continuously, which increases the resistance of the bag filter_ After 1200pa, the bag filter can continue to work, and it needs to be fixed regularly_ For the dust on the filter bag, the PLC program controller starts and starts the artery flushing valve regularly and sequentially, so that the compressed air (0
5-0
7mpa) in the air bag is ejected from the spray pipe (called primary air) and induces the surrounding air (called secondary air) several times higher than the primary air into the filter bag through the venturi, so that the filter bag expands rapidly in an instant, and shakes off the dust with the reverse force of the air flow to achieve the purpose of ash removal