Correct use of high speed turbine fan

If users do not strictly follow the instructions in use, it will also reduce the use effect of the fan and even shorten the service life of the high-speed turbine fan, which is also a great loss for users
The correct use of the high-speed turbine fan can not only ensure its use effect, but also prolong the service life of the fan to a great extent
Therefore, many users want to know what kind of use is correct, Ruitian Electromechanical Technology Co
, Ltd
here introduces some tips for using high-speed turbine fan
I believe that as long as users master these, they can certainly improve the use efficiency of fans to a certain extent

　
The first use of high-speed turbine fan starts from its start-up
Sometimes there are problems of startup failure or very long startup time
There are many reasons for this
If the motor cannot be dragged, check the set value of the safety mechanism; Replace the motor if the rated power is too low; If the starting procedure is incorrect, adjust the starting equipment; If the power consumption is too large when starting, verify whether the gas flow control mechanism is in the closed position when starting; If the rotor is jammed, turn the fan by hand to check and investigate the cause of jamming (friction, obstacles, etc
); If the voltage at the wiring of the motor is too low, check the voltage of the power line
If the loss is too large, increase the power line

 
Many times, users will find that the impeller always consumes energy in vain
The leakage of gas between the front cover and the collector forms a circular activity
A certain clearance shall be maintained between the front cover of the centrifugal fan and the collector and between the casing and the rotating shaft
To ensure the reliability of fan rotation
This can alleviate this phenomenon to a great extent

The common problem in the use of high-speed turbine fan is the vibration of the fan
It is not a simple thing to fundamentally solve this problem, but reducing the speed of the fan is a very good method, and the effect of this method is also remarkable
However, users need to judge what method to use according to the specific situation of the fan used in order to be more reasonable