Characteristics of hydraulic fracturing machine for Chongzuo rock cracking machine in Guangxi low construction cost

  The hydraulic splitting machine has the characteristics of low construction cost
The stone splitting rod is used to excavate and replace the drilling pipe
One of the two pipes is pressurized and the other is returned to the pressure gauge for 20MPa
Close the motor, the pressure gauge does not move, the overflow valve of the gauge is broken, the sealing of the reversing valve of the pressure gauge return to zero gauge is broken, the splitting machine can not be pulled out, the stone is too large, the gap is too small, and the drill is stuck
If the drill is broken, it must be filled with hydraulic pressure (46 hydraulic pressure, 38 liters, reaching 90% of the scale) before starting the machine for operation
Then cut the stone from the splitting hole
The stone split from the mountain with a splitter is a whole, and the flatness error is generally within a few centimeters
Compared with blasting mining, splitting machine mining is obviously economical quarrying

It is understood that the recovery of the industry has experienced years & ldquo; Cliff slide & rdquo; Also replace the sealing ring at the oil inlet of the pump, connect the pipeline from the oil tank to the pump, and fill the oil tank with clean hydraulic oil from the oil port of the hydraulic filter element
It should be noted that Chongqing excavation and cutting rig can only operate the corresponding parts to avoid operation errors
In addition, the sealing ring must be replaced for all disassembled oil pipes
It only takes a few seconds for the hydraulic splitting machine to crack the rock
The structure of the splitting machine: the splitting machine is composed of a hydraulic power station and a splitter
The working principle is that the ultra-high pressure oil output from the pump station drives the oil cylinder to generate a huge driving force, and the broken object can be cracked in the predetermined direction after mechanical amplification

 
The ground rock cracking machine of Guangxi Chongzuo rock cracking machine room is a high-tech static equipment for the depth of the holding hydraulic splitting machine
It uses the excavator as the platform for splitting construction
The splitting force of airborne hydraulic splitting machine can reach 5000 tons
Rock cracking machine has technical advantages and sophisticated manufacturing technology, and is suitable for harsh working conditions
It has been tested on site in more than 100 countries and regions around the world, and has been deeply recognized and affirmed by customers

Stone splitting rod, high working efficiency and high cost performance
The hydraulic splitting machine has a splitting force of nearly 600 tons, the one-time splitting section can reach more than 1
5 square meters, and multiple splitters can reach thousands of tons of splitting force
It can split the next boulder in about seconds
Compared with similar foreign products, it has an outstanding cost performance

Note 1: Power: it is divided into 2
2kW electric, 4kw electric and 6kW diesel engine