Application scope of Fujian electric rail cutte

  Application scope of Fujian electric rail cutter “ Iron promotes people ” We have been adhering to the principle of taking user needs as the core, thinking about the needs of customers and being anxious about the needs of customers
We actively advocate: Taking the market as the guide, taking innovation as the means, and actively exploring the market
Gradually establish a good brand and influence
In the face of new forms and opportunities, always carry forward “ Innovative, pragmatic, collaborative and efficient ” Enterprise spirit and “ Quality first, reputation first " Our service concept is to serve every customer well

Application scope of Fujian electric rail cutter
　　--------------------------------------------------------------------------------
Customer consultation: 1318132417
Contact: Manager Ru
Address: Rencheng District, Jining City, Shandong Province
Office: 0537 - 2255800
400 Tel: 400691 2018
Technical service: 1318132417
　　--------------------------------------------------------------------------------
Application scope of Fujian electric rail cutter
Operation process of railway electric rail cutter
1
Turn on the power supply and press the start button “ ON”， Observe whether the grinding wheel spindle rotates and whether its rotation direction is consistent with the rotation direction of the grinding wheel indicated on the protective cover
If the spindle does not rotate or the rotation direction is different from that of the grinding wheel indicated on the protective cover, press the shutdown button “ OFF” Cut off the power supply, change the phase sequence of the power supply, repeat the above process until the grinding wheel spindle rotates, and then install the flake grinding wheel

2
Before installing the flake wheel, check whether the flake wheel has cracks, whether the two sides are straight, and whether the uneven surface can cause notch deflection and clamping
Tighten the locknut after installing the flake wheel, but the torque should not be too large to avoid crushing the flake wheel

3
Install the railway electric rail cutter on the steel rail, install the fixture, and move the railway electric rail cutter to the preset cutting position as required
Then make the inner surface (convex surface) of the fixture close to the top surface of the rail and the lower part of the rail palate, tighten the set bolt, and the railway electric rail cutting machine is in working state

4
Pull the control lever with one hand to make the rail sawing machine above the steel rail, and support the other control lever with the other hand to prevent the sheet grinding wheel from hitting the steel rail

5
After installing the rail sawing machine, press the start button “ ON” The motor can be started
After the motor is started, the no-load operation time shall not be less than 30 seconds
Observe whether the flake grinding wheel operates stably, whether it deflects and jumps, and whether each part is normal
If any abnormality is found, stop the machine to replace the grinding wheel or eliminate the fault

6
During cutting, the feed of the flake grinding wheel mainly depends on the self weight of the railway electric rail cutter and the swing of the control lever
Therefore, when supporting the control lever with both hands, do not apply pressure downward, and swing the control lever rhythmically as required

7
During the cutting process, the hand-held control lever shall swing back and forth without stopping somewhere
When clamping occurs, slowly lift the flake grinding wheel, and then continue to cut the steel rail
If clamping still occurs, stop the machine to check the cause or replace the flake grinding wheel
When cutting again, the slice grinding wheel must be completely consistent with the original cut, otherwise, the cutting position shall be changed

8
In the cutting process, if the cut is inclined, stop the machine to check the cause, eliminate the fault or replace the flake grinding wheel, change the cutting position and re cut

9
Generally, the top of the rail is cut first, then the waist, and then the bottom, until the rail is cut

Application scope of Fujian electric rail cutter
Premium presales:
1
The supplier is responsible for railway or automobile transportation
2
Arrive at the delivery place according to the delivery time and method specified by the user;
3
The user shall conduct acceptance according to relevant product standards;
4
Do a good job in technical consultation and provide users with free technical training;
5
The quantity of spare parts is sufficient, the variety is complete, and the supply is guaranteed at any time

Application scope of Fujian electric rail cutter
Due to different product batches and specific models, the above parameters are for reference only
For details, please contact our sales personnel for specific verification

Toll free: 400-619-2018
Website: www
sdtxtl cn