Anli China general representative mt8862a

  Mt8862a WLAN tester wireless connection tester mt8862a is used to measure wireless LAN IEEE802 11A / B / g / N / AC / ax (2
4 GHz and 5 GHz band) TRX RF characteristics of equipment
Mt8862a has standard WLAN protocol information (WLAN signal) connected to the equipment under test (DUT)
In the network mode, it can measure the performance items of each TRX, and has a built-in direct mode to support a flexible test environment

RF performance test (network mode) under actual operation conditions can be measured by wireless LAN equipment under actual operation conditions by using mt8862a network mode and TRX RF characteristics, such as TX power, modulation accuracy (EVM), etc
Without directly controlling the DUT and turning on the special test mode, the RF performance of the DUT can be quantified under the firmware condition of the actual load

The simple measurement environment configuration mt8862a can simulate the establishment of access point (AP) and station (STA) and use IEEE802 11A / B / g / N / AC / ax DUT network connection for WLAN protocol information
After the connection is established, the general WLAN communication program can be used without special tools and control programs to measure RF, and there is no need to configure a special measurement environment

The measurement function of 2x2 MIMO receiving sensitivity and transmitting power uses two mt8862a to test the receiving sensitivity and transmitting power of 2x2 MIMO
It is an ideal scheme to evaluate the RF characteristics of the final product under the communication state of 2x2 MIMO

Devices with measurable security settings support WLAN encryption technologies such as WEP, WPA personal and WPA2 personal, and can be connected and measured without releasing the security settings of DUT

Unique transmission measurement data rate control algorithm mt8862a network mode is equipped with a unique data rate control algorithm, which can carry out transmission measurement at the data rate specified by the user

RX Sensitivity Measurement uses the command correct response frame count generated by calculating the failure rate curve
Mt8862a supports RX Sensitivity Measurement Using the command correct response frame count; The number of correct response frames of the command sent by the DUT and the packet loss rate (per) supported by the test data packet sent by the mt8862a; When the power level is reduced by setting the power level range (- 120 to 0 DBM) and step size, data packets can be sent to automatically generate the failure rate curve of RX Sensitivity
Packets containing media access control addresses and payload lengths can be configured in real time to measure different data rates

The GUI operation of the web browser can be executed immediately after the network connection
The mt8862a is quickly connected with the personal computer through the Ethernet cable on the web browser to complete the installation of the GUI operating environment without testing the installation operation

GUI Based Web browser eliminates the worry of matching the version of host firmware
In addition, the mt8862a remote control port supports the client function of Dynamic Host Configuration Protocol
By connecting the personal computer controller and mt8862a to the same network, you can simply control the setting of host and domain name

The frame capture log used to discover and handle connection problems has a built-in frame capture log function
Mt8862a can capture and save frame capture logs to discover and handle DUT connection problems
Capture logs are available in * Using supported applications in pcap (process characteristic analysis package) format will make it easier to analyze the connection problem of DUT

The connection verification test is used to transmit internet protocol data
The Ethernet port on the mt8862a backplane can be used to exchange internet protocol data with external servers; The internet protocol connection between the personal computer client connected to the DUT and the external server connected to the mt8862a can be checked using the Internet packet explorer, etc