Activated carbon adsorption regeneration equipment catalytic combustion integrated machine

The regeneration method of catalytic combustion activated carbon is as follows: the organic gas source in the desorption equipment is sent to the catalytic combustion regeneration device through the action of induced draft fan, first through the dust removal flame arrester system, then into the heat exchanger, and then sent to the heating chamber
The gas reaches the combustion reaction temperature through the heating device, and then the organic gas is decomposed into CO2 and water through the action of catalytic bed, The high-temperature clean gas then enters the heat exchanger for heat exchange with the low-temperature desorption gas to raise the temperature of the desorption gas to the reaction temperature
After catalytic combustion, the removal rate of desorption gas is more than 97%

Reaction principle: the core equipment of catalytic combustion is composed of heat exchanger, catalytic bed, electric heating element, fire and dust arrestor and explosion-proof device
The fire and dust arrestor is located on the air inlet pipe, and the explosion-proof device is located on the top of the main engine
Gas and electric valves: used for automatic control during switching between adsorption and desorption of adsorption bed
Automatic equipment control is a setting that can be switched flexibly to ensure the normal and effective operation of the production line and processing equipment
In case of high temperature, failure, maintenance and repair of the equipment, the valve will open automatically
Nitrogen protection system: considering the stable operation of the equipment, 97% nitrogen is injected into the activated carbon adsorption bed after the system executes the desorption procedure, or nitrogen is injected intermittently when the temperature detection unit of the activated carbon adsorption bed detects abnormalities during the operation of the equipment
Nitrogen injection can achieve the function of flame retardant and ensure the operation of the equipment
Flame arrester: isolate the danger between the equipment and the waste gas source, ensure the stability between the treatment equipment and the production equipment, and remove the dust in the waste gas source at the same time
The structure is corrugated mesh type, which is manufactured according to the standard; Quick replacement and convenient cleaning
It is one of the facilities in this equipment