LX-XDA Series Xenon Lamp Aging Test Chamber with | RFQ Sourcing Details
Laboratory Instruments · Quote on request
This is a product procurement detail page: check specs, images, category context and related sourcing paths before sending an RFQ.
Quote on requestProduct specs
Buyer's Digest
Use this page as a product-first sourcing checkpoint before sending an RFQ. Category: Laboratory Instruments. Confirm application fit, capacity, materials, destination, lead time and compliance requirements before comparing suppliers.
Original product description
The LX-XDA series is designed for accelerated weathering and aging tests that combine xenon-lamp exposure with controlled temperature, humidity, and rain-spray conditions. It can be used to observe changes such as color fading and performance degradation under programmed light and environmental cycles.
Four configurations are listed: LX-XDA80, LX-XDA270, LX-XDA500, and LX-XDA1000. Their internal chamber dimensions range from 70 × 40 × 30 cm to 100 × 100 × 100 cm. The chamber temperature range is RT+10°C to 70°C, with stated temperature accuracy of ±0.1°C and uniformity of ±3°C.
Humidity is specified as 20%–60% RH during light cycles and 30%–98% RH during dark cycles, with stated accuracy of ±1% RH. The chamber uses two air-cooled xenon lamps with an approximate stated life of 1,200 hours. Available lamp power is listed as 1.8 kW or 2.5 kW.
The specified full-spectrum range is 290–2450 nm, with adjustable irradiance values given for the full spectrum, 420 nm, 340 nm, and the 300–400 nm UV band. Black-panel temperature is adjustable from 40°C to 100°C during light cycles and from 25°C to 85°C during dark cycles.
Programmable functions include light-cycle duration, rain duration, rain interval, and a sample-to-lamp distance adjustable from 200 to 500 mm. Water-spray pressure is specified as 0.12–0.15 MPa. Depending on model, the effective exposure area is listed as 2,200–6,400 cm².
The interior is specified as SUS 304 stainless steel;the exterior may be SUS 201 stainless steel or cold-rolled steel plate with baked paint.
Procurement questions to confirm: Buyers should verify the exact model and usable specimen capacity, selected lamp power, exposure area, exterior construction, cooling configuration, and required electrical installation.
The source lists a 380 V power supply for the presented configuration, but phase, frequency, current, and total connected load should be confirmed.
Buyers should also confirm which test methods and calibration documentation are included for their required standard, because references to ISO 4892, ASTM G155, and SAE J2527 do not by themselves establish certification of every configuration.
Confirm included accessories, water requirements, sensor and irradiance-calibration arrangements, lamp replacement parts, packaging dimensions, commissioning, training, lead time, and the applicable warranty conditions before ordering.
LX-XDA | Applications and Buyer Notes
LX-XDA is organized as a sourcing-ready Laboratory Instruments reference. The page combines visible product or company data with structured procurement cues so buyers can compare application fit, specifications, quantity, quality requirements and lead-time que
Applications
- Initial shortlist building for related product or supplier options.
- Specification and application fit review before bulk purchasing.
- Category, keyword and detail-page comparison before sending an RFQ.
Key specifications
- Category
- Laboratory InstrumentsBased on visible page data; confirm exact value in the RFQ.
- Unit
- setBased on visible page data; confirm exact value in the RFQ.
- Lamp power
- 1.8 kW or 2.5 kWBased on visible page data; confirm exact value in the RFQ.
- Xenon lamps
- Two air-c ed xenon lampsBased on visible page data; confirm exact value in the RFQ.
- Model series
- LX-XDA80, LX-XDA270, LX-XDA500, LX-XDA1000Based on visible page data; confirm exact value in the RFQ.
- Rain duration
- 0–9999 minutes;cycle rain duration adjustable from 1–240 minutesBased on visible page data; confirm exact value in the RFQ.
- Rain interval
- Adjustable from 1–240 minutes lessons.Based on visible page data; confirm exact value in the RFQ.
- Humidity range
- Light cycle: 20%–60% RH;dark cycle: 30%–98% RHBased on visible page data; confirm exact value in the RFQ.
Buyer tips
- State quantity range and split-delivery needs before price comparison.
- Add certification, material or inspection standards when they affect acceptance.
- For time-sensitive projects, include target arrival date and destination.
- For special applications, describe operating condition, installation environment and duty cycle.
FAQ
What should buyers confirm first?
Confirm application, specification, quantity, destination and lead-time requirements before comparing offers.
Can buyers inquire when specs are incomplete?
Yes. Add model, material, size, use case and inspection needs in the RFQ to make replies comparable.
How should this listing be evaluated?
Check title, category, specifications and related keywords against the actual sourcing requirement.
Source mix: ugc
Key specifications
Product sourcing keywords
These terms come from the title, visible copy and specifications, and link into matching aggregate pages.
Continue from this detail page into sourcing structure
These links connect the detail page back to category hubs, procurement aggregates and knowledge pages so new inventory is not isolated.
This URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cleanroom And Lab Furniture categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Laboratory Instruments categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Sample Preparation And Consumables categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Testing And Measurement Equipment categoryThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Procurement sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 0 001g High Accuracy Laboratory Grade Analytical Balance For Gold Jewelry Measurement Analytical BThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cleanroom Monitoring Systems sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Cleanroom Product Suppliers sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Digital Inspection Microscopes sourcing pathThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path 16500rpm High Speed Capillary Hematocrit Centrifuge For Hospital Medical Use Hematocrit CentrifugeThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Advanced Cup Temperature Shock Test Chamber For Gas ImpactThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path Aoda 2700 Nir Spectrometer For Food Feed And Grain AnalysisThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Internal sourcing path CompanyThis URL was refreshed but still has no Googlebot evidence, so it is promoted into shared internal links for crawl discovery.
Ots PLC Touch Laboratory Temperature Humidity Test Chamber - Temperature Humidity Test Chamber and LRequest Quote
M017 AN Series Vertical Textile Flammability Test ChamberRequest Quote
LX-IPX56-1000 IPX5/IPX6 Rain Test Chamber with 1000 mm Test SpaceRequest Quote
TH-8203 Series Single-Column Electronic Tensile and Compression Testing Machine, Up to 2 kNRequest Quote
TH-8203 Series Single-Column Tensile, Compression, Peel and Tear Testing MachineRequest Quote
TH-8203 Series Electronic Tensile and Peel Testing Machine, Up to 2 kNRequest QuoteLabInstSource related sourcing paths
LabInstSource procurement phrases
LabInstSource related product samples
We are a manufacturer specializing in the R&D of laboratory electric heating equipment. Our process is unique worldwide,...
Sample Preparation and Lab Basics Semi-Exhaust Type Biological Safety Cabinet Machine Medical Equipment - Medical Equipment and MedicaSemi-exhaust type biological safety cabinet school laboratory 1.Description The biosafety cabinet protects both human sa...
Sample Preparation and Lab Basics Etcolabs PP Fume Hood - Compliant with En 14175 Ashrae mm - 2026 Fume Hood, En 14175 FuIn the domain of laboratory safety, our fume hoods stand as indispensable protectors, catering to the rigorous demands o...
Sample Preparation and Lab Basics Laboao InUsing American Marlow semiconductor refrigeration sheet, the maximum temperature change rate is more than 5 degrees per ...
Sample Preparation and Lab Basics Erun-Sp9-B6 High-Accuracy Turbidimeter Laboratory-Grade Tool for Industrial Water Quality TestingIntroduction This instrument features 16 channels for the optical method and can measure over 60 parameters, as well as ...
Sample Preparation and Lab Basics Cordial Lab 5-5000ml Borosilicate 3.3 Glass Low Form Beaker for Lab Use - Glass Beaker and Low Form: With Spout and graduations 4. Color: Clear-to-read white enamel graduated scale. 2) Borosilicate tubing made and machi...