Zhihao 600 pulverize

  Zhihao 600 pulverizer is not afraid of low starting point and no pursuit in life; Not afraid to walk slowly, but afraid to go the wrong way; Not afraid of disappointments, afraid of impassability; Rather than envy others, it's better to come to a new mill to make more people envy you

Machine highlights:
1
High degree of automation, intelligent one key start, automatic feeding, automatic dust removal and automatic weighing

2
The machine is environment-friendly and free of dust pollution
The machine has obtained the special license for environmental protection, and its dust emission is far lower than the national emission standard
It will not stop production because the machine is not environmentally friendly
3
The equipment is safe and stable in operation, with low production noise and low vibration
4
The grinding chamber is cooled by water as a whole to ensure that the properties of materials do not change during crushing
5
The production efficiency is high and the output is significantly higher than that of the old turbine mill
6
The door of the grinding chamber can be opened to quickly clean the grinding chamber and facilitate the replacement of Dao and tiles
Configuration of different models of mills:
Type 600:
One 55kW motor for 600 main engine
Fixed dao15, moving dao28
Dust removal fan 7
5kw
One 0
75KW motor for vibrating screen
One 1
5KW motor for the elevator
 
One load cell
Type 800:
One 90kw motor for 800 main engine
Fixed dao19, moving dao36
Dedusting fan 15kw
One 0
75KW motor for vibrating screen
One 1
5KW motor for the elevator
One load cell
Maintenance knowledge of pulverizer:
1
The machine must be used empty when starting (the host cannot have materials, and the machine must be started empty, otherwise the motor is easy to burn), and it must be cleaned up in time before starting on and off duty

2
When off duty, the hopper shall idle for 5-10 minutes when there is no material

3
Clean the ash every day
(automatic pulverizer has automatic ash cleaning function button, and manual cleaning is required)
4
Bearing lubrication
(1
If the rotor has oil holes, it shall be drilled once a day within ten days of the new machine
It shall withstand 300 ℃ high temperature butter
It shall be drilled enough at one time, and it can be drilled once every 7-10 days after ten days
2
Oil the outer hole every day)
5
Adjust the tightness of the belt every day

6
The machine is water-cooled, and the water inlet temperature cannot exceed 30 ℃

7
In case of vibration of the machine, balance calibration shall be carried out in time

8
If the knife inside the host is broken, replace it with a new one, and balance and calibrate it in time

With the gradual enhancement of people's awareness of environmental protection, various industries pay more and more attention to the concept of environmental protection in the process of development
As a mainstream environmental protection mechanical product, pulverizer has an increasingly far-reaching impact

The reason why the environmental protection pulverizer is environmentally friendly is that the dust emission is far lower than the national emission standard, and has obtained the environmental protection book, responding to the tide of low-carbon environmental protection