Yichang environmental protection dusting and fog gun site vehicle mounted spray machine full automatic dustproof construction fog foam machine

Yichang environmental protection dusting and fog gun site vehicle mounted spray machine full automatic dustproof construction fog foam machine   What are the types of dust spray: air spray air spray relies on a high-power fan as the water mist power source to atomize the water through high pressure
The atomization effect is excellent
Under the action of the fan, the water mist is blown to the distance, with a high range and wide coverage
Air spray is an important spray for dust removal equipment in coal storage yard, coal transfer station, port wharf, railway freight yard, steel slag yard, iron ore quarry and other storage yards
The sprayed water mist can well agglomerate with the dust in the storage yard
The dust drops under the action of gravity, and the dust removal and dust suppression effect is remarkable
Vehicle mounted spray vehicle mounted dust spray is divided from the installation mode
Its mobility is very good
It can be free from geographical restrictions
It can carry out dust removal at various locations according to the dust removal requirements of coal storage yards, coal transfer stations, port terminals, railway freight yards, steel slag yards, iron ore quarries and other storage yards
The vehicle mounted dust reduction spray is very suitable for the needs of large industrial and mining storage yards
Where you need to go, Its mechanism is the perfect combination of the water tank and the spray, which can well deal with the problem that the spray does not move long distances
The fixed spray and the vehicle mounted spray correspond to the fixed spray, which is fixed on the platform and does not need to be carried by vehicles
Depending on the range and rotation of different spray, different spray can reduce dust, and its horizontal rotation is 0°- 320° Adjustable, vertical - 0°- 40° Adjustable, which can ensure that all parts of the site can be sprayed in place to achieve the effect of dust reduction; High range spray high range spray has a high range of up to 200m
Its main function is to use spray with long-range and special height requirements Seven troubleshooting methods for dust removal spray in general, if there are some faults in the spray, we can learn from some experience to eliminate them
Here is a complete set of troubleshooting methods for spray:   The reason why there is no fog and water dripping is that the filter screen in the casing is blocked, and the inclined hole in the nozzle is blocked
Remove and remove the blockage
2
During spray, water and gas are sprayed out at the same time
The reason is that the weld of the infusion pipe in the barrel is desoldered, or the infusion pipe is corroded by the liquid medicine
It is necessary to repair the weld or replace the pipe
3
The spray is scattered and not conical
The reason is that the spray hole is not in the right shape or blocked by dirt, resulting in poor atomization
Unscrew the nozzle cap for adjustment and remove the dirt from the nozzle hole
4
The air cylinder cannot be pumped into the air
The first reason is that the leather cup shrinks and hardens, wears and cracks; Second, the screw at the bottom of the leather cup falls off and the leather cup falls off
The dried shrink cup is unloaded and soaked in engine oil or animal oil, and then installed after expansion; Replace the broken leather cup with a new one
If the screw is loose, install the leather cup and tighten it
5
The air leakage of the air cylinder gland or water filling cover is mainly caused by the lax sealing
Check whether the rubber gasket is damaged or not leveled, and whether the flange is desoldered from the air cylinder
Replace the gasket, install and level it, and repair the desoldered part as appropriate
6
The plug rod and gland will emit water, the gas cylinder wall and the gas cylinder bottom are desoldered, or the steel ball in the valve shell is stuck by dirt and cannot be tightly closed with the valve body, which will cause water emission
Repair welding or remove dirt as appropriate
7
If the switch leaks, the gap caused by the damage of the switch or the aging of the asbestos rope under the switch cap will lead to water leakage
Replace it with a new one or a new asbestos rope according to the situation, and tighten it