Yangzi flooring Milan style series flooring handicraft art aesthetics flooring Yapingning huaimu flo

The <<<<<<<<<<<<<<<<<<<<<<<<<< < <<<<<<<<<<<<<<<<<< < < < << <<<<< <<<< <<<<<<<<<< <<<<<<<<<<<<<<<<<<<<<<

figure It's a case in the case of a <
formaldehyde emission:	-
Foreign Trade:	Yes
Color:	Gold
specification:	450 * 450 * 15

, Solid wood floor, also known as log floor, is a floor directly processed from solid wood
It has the texture of natural growth of wood
It is a poor conductor of heat
It can warm in winter and cool in summer
It has the characteristics of comfortable foot feeling and safe use
It is an ideal material for floor decoration such as bedroom, living room and study
The decorative style of solid wood is simple and natural
Today, with the decline of forest coverage and the vigorous promotion of environmental protection, solid wood flooring is more precious

Laying points:
(1) the floor shall be laid in the later stage of construction, and cross construction is not allowed
Grinding and painting shall be carried out as soon as possible after laying
To avoid soiling the floor or deforming it with moisture
(2) the floor should be unpacked and stacked on the laying site for 1 ~ 2 days before laying to make it adapt to the environment to avoid expansion and shrinkage deformation after laying
(3) moisture proof measures shall be taken for laying, especially in wet places such as the bottom layer
Moisture proof measures include coating moisture-proof paint, paving moisture-proof film, using bedding treasure, etc
(4) the keel shall be flat and firm
It is forbidden to use cement for reinforcement
It is best to use expansion bolts, American nails, etc
(5) the keel shall be made of larch, Liu'an and other wood with strong nail holding force
The moisture content of keel or rough floor shall be close to that of floor
The keel spacing should not be too large, generally no more than 30cm
Both ends of the floor shall be placed on the keel without empty storage, and nails must be nailed on each keel
Do not use water-based glue
(6) the floor should not be laid too tightly, enough expansion joints (0
5 ~ 1
2 cm) should be left around, and it should not be laid too wide
In case of wide occasions, it should be separated and cut off, and then press the copper strip for transition
(7) complete isolation and moisture-proof measures shall be taken at the junction of floor, hall, toilet, kitchen and other stone floors
(8) the floor color difference is inevitable
If there are high requirements for color difference, it can be sorted in advance and the method of gradual transition can be adopted to reduce the visual sense of sudden change