Yangzhou Ruipu electric actuator module cpa101-220

  Product introduction: CPA electric actuator control module (applicable to 3410, 3610, 3810 and other series of electric actuators)
Its main components are directly ordered to Japanese manufacturers for domestic assembly by air, fundamentally ensuring the quality and service life of the products
For details, please consult manager Wang 15380329557 (also Weixin)
Model: cpa100-220, cpa101-220, cpa201-220
◆ the actuator is designed with a servo system (without additional servo amplifier)
It can work only by connecting DC4 ~ 20mA (or DC1 ~ 5V) signal and AC220V single-phase power supply
With boundary terminal inside, the wiring is very simple and convenient

◆ the controller, the key component of the actuator, adopts advanced hybrid integrated circuit and is sealed and cast with resin
It is in the shape of a box, small in size and high in reliability

◆ high performance conductive plastic potentiometer is used for feedback detection of driving quantity, with resolution < 0
4﹪
◆ it has self diagnosis function
In case of fault, the indicator light on the controller will immediately send an indication signal

◆ use the state selection switch to set the positive and negative actions

◆ the input signal can be set to DC4 ~ 20mA or DC1 ~ 5V with the status selection switch

◆ it is easy to adjust the working zero point (start) and stroke full position (end)

◆ in case of sudden power failure, it can ensure the self-locking of valve element

◆ adopt gear transmission, with high reliability

◆ intelligent limit is adopted, which is more stable and reliable than the limit switch

◆ time delay protection function: under rated load, it can implement state self-locking
In case of fault, it can start protection and reverse operation to cancel time delay protection

◆ hybrid integrated circuit is adopted, high temperature and fatigue aging treatment are strictly carried out, resin is sealed and poured, moisture-proof and shockproof
◆ overload protection function
When the rated load is exceeded, it will automatically enter the state of self-locking and start the overload protection
◆ use the state switch to set three states of valve position when the signal is off: self-locking, fully open and fully closed
◆ use the status switch to set the input signal as dc4-20ma or dc1-5v
Main technical parameters:
◆ power supply: ac2205, 50Hz

◆ power consumption (at rated load)
Specification: type a actuator 50VA;
Specification: type B actuator 150VA;
Specification: C-type actuator 220VA;
◆ input signal: DC4 ~ 20mA or DC1 ~ 5V
◆ output signal: DC4 ~ 20mA
◆ control accuracy: basic error: 1% return error ≤ 1% dead band ≤ 1﹪